The PowrLiner™ 4955 is engineered for contractors managing medium to large-scale striping projects who require consistent power and heavy-duty performance. As the entry point into the hydraulic striper series, this unit is designed to maximize operational efficiency and profitability on the job site.
NOT for California
NOT for California
Always verify coating requirements and compatibility before use.
The SmartArm™ gun holder features adjustable swivel and lift capabilities, allowing for rapid line alignment and simplified transport.
Equipped with a slow-stroking hydraulic drive system, the unit operates smoothly to significantly enhance the overall service life of the equipment.
A patented heat-treatment process is applied to the cylinder and piston rod, extending pump longevity by as much as 150%.
The system offers precise pressure regulation ranging from 27 to 227 bar, accommodating materials from low-viscosity coatings to low-VOC striping paints.
The chassis features an epoxy-coated finish, providing robust protection against corrosion and exposure to aggressive solvents.
Includes a secondary spray gun kit, complete with an S-3 gun, hose, and nozzle, to facilitate the application of double or wider lines.
Features a high-capacity 45-liter paint hopper for extended operation.
Integrated pneumatic tires provide superior shock absorption during transport and operation.
An integrated hose holder is located on the rear of the unit for convenient and organized storage.
The design allows for quick, tool-free conversion between gas and electric power sources to meet specific site requirements.
| Max. Tip (") | 0.034 " |
| Max. Operating Pressure (psi) | 3300 psi |
| Max. Material Delivery Rate (gal/min) | 1.25 gal/min |
| Processable materials | Latex, Oil-based |
| Weight (lbs) | 324 lbs |
| Power Supply | gasoline powered |
| Certification | Complies with CE directive |
| Application area | Line Striping |
| Holder / Mount | none |
| Scope of delivery | Base unit; PowrLiner 4955 incl. gas engine, Suction system; flexible, HP hose whip DN6; NPSM 1/4"; 2 m (art. no. 316-533), Airless gun S-3; 1/4”; incl. Tip holder; with 4-finger trigger, Airless gun S-3; 1/4”; incl. Tip holder; with 4-finger trigger, Airless tip TR1 line striping; 419 (art. no. 697-413), Airless tip TR1 line striping; 419 (art. no. 697-413), Airless tip SC-6+; 517 (art. no. 662-517) |
| Weight | 391.98 lb (177800 g) |
| Dimensions | 69 x 37.25 x 49.312 in (1753 mm x 946 mm x 1253 mm) (L x W x H) |
| Country of Origin | USA |
| Customs Tariff Number | 8424.20.9000 |
| Part Number | Description |
|---|---|
| 697-215 | TIP, 2"FAN; .015 ORIFICE |
| 697-217 | TIP, 2" FAN; .017 ORIFICE |
| 697-413 | TIP, 4" FAN; .013 ORIFICE |
| 697-415 | TIP, 4" FAN; .015 ORIFICE |
| 697-417 | TIP, 4" FAN; .017 ORIFICE |
| 697-419 | TIP, 4" FAN; .019 ORIFICE |
| 697-421 | TIP, 4" FAN; .021 ORIFICE |
| 697-423 | TIP, 4" FAN; .023 ORIFICE |
| 697-427 | TIP, 4" FAN, 027 ORIFICE |
| 697-431 | TIP, 4" FAN; 031 ORIFICE |
| 697-615 | TIP, 6" FAN; .015 ORIFICE |
| 697-617 | TIP, 6" FAN; .017 ORIFICE |
| 697-619 | TIP, 6" FAN; .019 ORIFICE |
| 697-623 | TIP, 6" FAN; .023" ORIFICE |
| 697-831 | STRIPING TIP, TITAN, 831 |
| 697-213 | TIP, 2" FAN; .013 ORIFICE |
| 697-219 | TIP, 2" FAN; .019" ORIFICE |
| 697-425 | TIP, 4" FAN; .025 ORIFICE |
| 697-435 | TIP, 4" FAN; .035 ORIFICE |
| 697-439 | TIP, 4" FAN; .039 ORIFICE |
| 697-443 | TIP, 4" FAN; .043" ORIFICE |
| 697-429 | TIP, 4" FAN; .029 ORIFICE |
| 697-621 | TIP, 6" FAN; .021" ORIFICE |
| 697-625 | TIP, 6" FAN; .025" ORIFICE |
| 697-627 | TIP, 6" FAN; .027" ORIFICE |
| 697-629 | TIP, 6" FAN; .029 ORIFICE |
| 697-635 | TIP, 6" FAN; .035" ORIFICE |
| 697-639 | TIP, 6" FAN; .039 ORIFICE |
| 697-643 | TIP, 6" FAN; .043" ORIFICE |
| Part Number | Description |
|---|---|
| 235-117A | MOTOR PUMP ASSY, PKGD |
| 0290113A | FILTER ASSY, PL, PKGD |
| 755-215 | WASHER-1/4"HI COLLAR LOCK |
| 858-634 | SCREW,SHC, 1/4"20 X 7/8" |
| 290340 | HOSE, PAINT, AIRLESS, 3/8 X 14.5" |
| 813-555 | FITTING |
| 0290629A | BELT GUARD ASSY, PKGD |
| 0533237A | SYPHON HOSE ASSY. SUPERCOAT CART |
| 0509762A | FILTER SCREEN |
| 0290992A | WELDMENT, HOUSING, PUMP, PKGD |
| 770-879 | LOCK WASHER #10 |
| 862-501 | SCREW, TREAD CUTTING |
| 858-636 | SCREW,HH, 1/4-20 X 1.0 LONG |
| 858-002 | WASHER |
| 528235 | BRACKET, HYDRAULIC COVER |
| 0537263A | CONVERTOKIT PL4955, PKGD |
| 0290117A | CONVERTOKIT, DC ELECTRIC, 230V |
| 0290115A | CONVERTOKIT 110V, PKGD |
| 449-181 | BELT, "V" A38 |
| 290799 | V-BELT, AX42 |
| 759-130 | PAINT HOPPER PACKAGED |
| 862-444 | SCREW, HH, 3/8-16 X 1-1/4, GRADE 5 |
| 9820305 | Washer |
| 862-410 | NUT, 3/8 LOCK |
| 9800312 | SCREW, 1/4-20 X .75, HXHD, GRD 5 |
| 9885659 | SWIVEL, PIPE, 3/4" X1" |
| 509285 | Flat washer |
| 290329 | BRACKET, BULKHEAD, HYD RETURN |
| 290338 | HOSE, RETURN, PL4955/6955 |
| 9885656 | FTG, BULKHEAD TEE, 8, 37 DEG |
| 290333 | HOSE, RETURN, |
| 862-472 | SCREW SUPERCOAT |
| 424-288 | CABLE GUIDE |
| 290894 | WELDMENT, GUN MOUNT |
| 290349 | KNOB ASSY, 3/8"-16 |
| 290350 | SPRING, WAVE |
| 290899 | CLAMP, LINECREW STYLE |
| 290342 | CABLE, GUN ACTUATOR |
| 9805456 | SCREW, HH, 1/4-20 X 1-1/4 |
| 290327 | ARM, SUPPORT |
| 509292 | WSHR, LOCK, 3/8 |
| 862-436 | SCREW |
| 290381 | GUN HOLDER ASSY. |
| 759-306 | KNOB ASSY, 3/8"-16 |
| 779-086 | CAP,DUST |
| 756-078 | NUT,5/8 CASTLE |
| 756-079 | PIN,COTTER |
| 756-080 | WASHER,SPRING |
| 779-068 | BEARING,TAPERED |
| 779-085 | SEAL |
| 779-013A | CASTER ASSY |
| 290897 | BLOCK |
| 290343 | WHEEL LOCK CABLE |
| 9805455 | SCREW, SHCS, 5/16-18 X 1/2 |
| 756-087 | SPRING |
| 290898 | PIN, CASTER LOCK |
| 290896 | COVER, BLOCK |
| 509219 | SCREW, 1/4 - 20 UNC X 3/8 PHIL |
| 290382 | SMART ARM |
| 761-178 | SCR, HEX FLANGE, 5/16-18 |
| 0290489A | AXLE, POWRLINER CART, PKGD |
| 763-549 | NUT, LOCK, 5/16-18 |
| 757-050-S | WHEEL |
| 176-919 | WASHER,STAINLESS |
| 770-144 | NUT, LOCK, HEX 1/4-20 |
| 770-601 | WASHER,FLAT 1/4 |
| 424-269 | BRAKE PAD |
| 860-004 | WASHER |
| 862-401 | NUT |
| 290684 | CLAMP, BRAKE, 3/8 SPINDLE |
| 858-652 | SCREW |
| 770-223 | WASHER |
| 0290697A | BUCKET, HOLDER, ASSY. |
| 0290109A | FRAME, WELDED, PKGD |
| 779-121 | PLUG,PLASTIC,RECT. |
| 290775 | STRAP, CABLE, 12" HOOK/LOOP |
| 0290110A | WELDMENT, HANDLE SUPPORTS, PKG |
| 779-090 | SWITCH |
| 9850936 | SWITCH,DPST,25A W/SPLASHGUARD |
| 700-771 | KNOB,PRESSURE |
| 290994 | BRACKET, PANEL GAUGE MNT |
| 88163 | TEE, 1/4 NPT STEEL 1/4MMO-S |
| 12440 | ELBOW, 90 DEG, 1/4NPTMX1/4NPTM |
| 9805458 | SCREW, TORX, 10-32 X 1-1/2 |
| 0290694A | DASHBOARD, PKGD |
| 9805459 | TRUSS HEAD 1/4-20 X .50 |
| 858-644 | SCREW |
| 700-139 | SCREW, STL, PHILHD, 8-32X1/2" |
| 290346 | STEM ADAPTER, COMPENSATOR |
| 9812336 | NUT,HH,JAM, 1/2-20, GRADE 8 |
| 290344 | NUT, ADAPTER |
| 290345 | COMPENSATOR STEM |
| 290367 | RELIEF VALVE, REMOTE, PL4955 |
| 9885660 | ELBOW, MALE, -8 JIC X 3/8BSPT |
| 9885655 | ELB, MALE 1/4 BSPT-3/8 |
| 290990 | HANDLE, BAR |
| 424-245 | HANDLE GRIP |
| 759-215 | LEVER |
| 9805454 | SCREW, SHCS, 5/16-18 X 4.00 |
| 290988 | COG, HANDLEBAR INNER 2 BOLT |
| 290989 | COG, HANDLEBAR MOUNT |
| 9885546 | CAPPLUG, RIBBED, 1.00 O.D. |
| 290987 | CLAMP, 2 BOLT |
| 9805453 | SCREW, SHCS, 5/16-18 X 1-1/2 |
| 862-428 | SCREW,HH, 3/8-16 X 3/4" |
| 800-036 | GROMMET |
| 759-015 | PIN,CLEVIS |
| 424-227 | CABLE SELECTOR SPOOL |
| 944-047 | SCREW, SOCHDCAP 10-32 X 5/8 |
| 290985 | MOUNT, HANDLEBAR LEVER |
| 424-203 | TRIGGER |
| 424-217 | LEVER PLATE |
| 424-218 | FLANGE BEARING |
| 759-034 | PIN,COTTER |
| 226-001 | NUT |
| 759-035 | STRAP,LEVER |
| 290986 | BRACKET, CABLE |
| 757-092 | SCREW,#10 X 1 BUTTON HD |
| 759-033 | KNOB,CLAMP |
| 290383 | KIT, HANDLE BAR CLAMP, PKGD |
| 290689 | HYDRAULIC PUMP |
| 9885657 | ELBOW, -4 ORFS, -6 JIC |
| 860-520 | SCREW, SET 5/16-18 X 1/2" LG |
| 449-195A | FAN/PULLEY ASSY, PKGD |
| 431-042 | CONNECTOR,TUBE |
| 325-031 | O-RING |
| 290336 | HOSE, RETURN |
| 451-029 | FITTING |
| 290770 | COVER, TANK, MACHINING |
| 449-605 | GASKET, TANK-1/16 THK |
| 858-621 | SCR, 1/4-20 X 1/2,SOC HD FLAT |
| 859-001 | SEAL WASHER |
| 858-624 | SCREW, HH, 1/4-20 X 5/8 |
| 528171 | DOUBLE NIPPLE HC-960 SSP |
| 472-500 | ELBOW, STREET, 90 DEG |
| 448-208 | SCREEN,INLET |
| 862-496 | BOLT, HEX HD, TAP,3/8-16X3.25 |
| 449-718A | HYDRAULIC TANK |
| 449-212 | PLUG, TANK W/O-RING |
| 862-493 | SCREW, HEX HD, 3/8-16 X 3 |
| 862-480 | SCREW, HH 3/8-16X2-1/2 |
| 192-228 | ELBOW |
| 449-126 | CLAMP, HOSE |
| 420-251 | TUBING, TEFLON, CUT |
| 192-051 | ELBOW, SHORT, FLARE X STREET |
| 451-220 | FILTER, CARTRIDGE LONG |
| 449-626 | DIPSTICK,CHROME(FLLR/BRTHR CAP |
| 449-609A | HYD BYPASS ASSY, PKGD |
| 449-614 | TUBE |
| 0528164A | DOWN TUBE, BRASS PACKAGED |
| 862-438 | SCREW,THUMB, W/SHOULDER |
| 862-402 | NUT,ACORN, 3/8-16, HIGH CROWN |
| 449-107 | RETAINER |
| 449-135 | SPACER |
| 235-030 | PLUG,HEAD |
| 441-217 | O-RING, BUNA-N, 2-119 |
| 858-811 | NUT, FLEX LOCK 1/4-28 UNF 2 |
| 235-018 | RETAINER,TRIP SPRING |
| 141-007 | O-RING, BUNA-N, 2-112 |
| 325-005 | SPRING,TRIP |
| 569-016 | BALL, 3/8, STAINLESS |
| 235-112FZ | HEAD, CYLINDER |
| 431-032 | O-RING |
| 441-152 | O-RING, BUNA-N |
| 431-053 | RETAINER,SLEEVE |
| 431-054 | RING, RETAINER |
| 235-022 | SCREW, PISTON RETAINER |
| 235-014 | PISTON |
| 235-027 | SEAL,PISTON |
| 235-026 | O-RING |
| 235-021A | VALVE ROD ASSY, PKGD |
| 235-948 | ROD, PISTON |
| 451-121 | ELBOW 90DEG. MALE |
| 700-499 | O-RING |
| 537563 | TUBE, HYDRAULIC, 3 INCH STROKE |
| 537564 | "T" FITTING, 3/8 MALE, SAE |
| 537565 | SWIVEL ADAPTOR, 3/8 X 9/16 JIC |
| 941-555 | BALL VALVE |
| 235-001 | RING,LOCK |
| 235-007 | CYLINDER |
| 235-028 | SEAL,ROD |
| 235-123 | BLOCK, MOTOR PUMP, XLT |
| 235-050 | SERV KIT,MINOR,MOTOR |
| 537928 | KIT, TUBE ASSY. PT4900, 6900 |
| 107-005 | FLUID SECTION ASSY. PT4900 |
| 143-019 | RING,RETAINER |
| 107-003 | PIN, CONNECTING, 3/8 |
| 106-015 | O-RING,PTFE |
| 106-002A | PACKING SET |
| 106-005 | SPRING,UPPER PACKING |
| 107-029 | ROD,DISPLACEMENT,SEVERE |
| 106-001 | RETAINER,LOWER SPRING |
| 106-116 | SLEEVE,SPRING |
| 106-016 | SPRING,LOWER PACKING |
| 569-021 | BALL |
| 107-058 | SEAT, OUTLET VALVE |
| 107-060 | WASHER,SEAL |
| 107-055 | OUTLET VALVE HOUSING |
| 107-946 | CYLINDER, PUMP |
| 106-014 | O-RING, SYNTHETIC RUBBER |
| 236-020 | WASHER |
| 107-056 | CAGE |
| 138-340 | BALL |
| 762-137 | SEAT, INTAKE VALVE |
| 762-058 | O-RING, #021 PTFE |
| 107-057 | FOOT VALVE HSG |
| 528299 | CYLINDER JAM NUT |
| 107-501 | SERVICE KIT,MAJOR,PUMP |
| 107-051 | SERVICE KIT |
| 107-015A | INLET VALVE ASSY, PKGD |
| 107-016 | OUTLET VALVE ASSY. LC-820 |
| 9811122 | NUT, 5/16-18, NYLOCK |
| 980-332A | ENGINE, GAS, 4.0 HONDA, PKGD |
| 980-106 | PULLEY, AK54 X 3/4" |
| 449-144 | POSITION BRACKET, ENGINE MOUNT |
| 294446 | WASHER |
| 290683 | PAD, VIBRATION, ENGINE MOUNT |
| 9822639 | WASHER, LOCK, 5/16, INT/ EXT TOOTH |
| 290484 | MOUNTING PLATE |
| 424-255 | SPRING, RETAINER |
| 9800088 | SCREW, HH, 5/16-18 X 3.0 |
| 0290628A | GUARD, BELT, WELDMENT, PKG |
| 9805415 | SCREW, BHCS #10-32 X .50, T-25 |
| 9805413 | SCREW, #10-32 X 3/8, FLAT HD |
| 9822523 | RING, EXT. 3/16 DIA. SFT |
| 528345 | BOLT, GUARD |
| 290794 | HINGE |
| 524318 | NUT |
| 0290627A | GUARD, BELT, PIVOTING, RED PKG |
| 0290443A | FILTER CAP ASSY. |
| 930-020 | SPRING, COMPRESSION |
| 930-006 | FILTER ASSY, SS, 50MESH |
| 920-006 | GASKET, TEFLON (THICK) |
| 920-070 | GASKET, TEFLON (THIN |
| 891-193 | O-RING, TEFLON |
| 180-909 | SEAT, TUNGSTEN CARBIDE |
| 814-002 | NIPPLE,HEX,3/8"(M)X1/4"(M) |
| 940-553 | VALVE,BALL |
| 227-006 | 1/4 NPT X 1/4NPS ADAPTER |
| 730-222 | OUTLET CAP ASSEMBLY |
| 290993 | BODY, FILTER |
| 290339 | HOSE, PAINT, AIRLESS, 1/4 ID |
| 814-004 | ADAPTER 3/8 NPT X 3/8 NPT |
| 930-050 | SERV KIT,FILTER (930 SERIES) |
| 944-030A | BYPASS VALVE COMPLETE |
| 500-515 | HOSE ASSEMBLY |
| 103-300A | BLEED TUBE ASSY, PKGD |
| 103-118A | DEFLECTOR/DIFFUSER |
| 335-590A | BLEED LINE ASSY, 1/4, PKGD |
| 944-040 | BLEED HOSE KIT |
| 944-029 | WASHER, .202 X .625 X .072 |
| 295731 | SPACER, HANDLE, VALVE, SPRAY, PRIME |
| 295730 | HANDLE, VALVE, SPRAY, PRIME |
| 9820905 | Disc spring 7/8 o.d. x .442 i.d. |
| 9822516 | snap-ring |
| 294501 | WASHER, DUMP VALVE |
| 944-011 | STEM, 1/4 DUMP VALVE |
| 9871045 | O-ring ID.362x.103 |
| 944-009 | HOUSING, ¼ DUMP VALVE |
| 9841502 | Outlet valve ball |
| 294516 | SEAT, VALVE |
| 294499 | SEAL, DUMP VALVE |
| 944-013 | VALVE RETAINER |
| 779-018 | AXLE, CASTER |
| 779-011 | FRAME, CASTER |
| 779-017 | SPACER,WHEEL |
| 779-016 | WHEEL |
| 779-014 | SHAFT,CASTER |
| 779-012 | RING, LOCATING |
| 779-019 | NUT, LOCK 3/4-16 |
| 451-052 | PLUG PLASTIC SQ 1-1/2IN |
| 290997 | E-RING, 1/2 SHAFT |
| 290995 | BUSHING, 1/2 ID X 3/8 LONG |
| 290062 | FRAME WELDMENT, GUN SUPPORT, PACKAGED |
| 290998 | CAP, 2" SQ |
| 290996 | SPROCKET, GUN ASSY LIFT |
| 756-076 | SCREW |
| 290351 | BEARING, BRONZE, 3/8 ID |
| 9805457 | SCREW, HEX HEAD, 3/8-16X2-1/2 |
| 290362 | BOLT, CARRIAGE, 3/8-16 X 2.50 |
| 290373 | WASHER, FIBER |
| 779-078 | KNOB, CLAMP |
| 757-055 | CAP,END |
| 290328 | BAR, GUN ASSY MOUNT |
| 759-316 | CLAMP BLOCK, LC800 |
| 756-037 | SCREW,SHOULDER 1/4X1/2 |
| 858-653 | SCREW, SHCS, 1/4-20 X 1-1/2 |
| 424-249 | BEARING |
| 858-603 | NUT,HEX,JAM, 1/4-20 |
| 9810108 | NUT, HEX, 1/4-20 |
| 424-202 | ACTUATOR LEVER |
| 756-034 | CLAMPING KNOB |
| 703-079 | SCREW,1/4 X 1-1/4 FLT HD |
| 759-057 | HOLDER,SPRING |
| 759-056 | HOLDER,SPRING |
| 762-052 | GREASE FITTING |
| 509781 | Spring |
| 860-936 | SCREW |
| 441-908A | SPOOL, VALVE W/SLEEVE, PKGD |
| 0290891A | WELDMENT, HANDLE, PKG'D |
| 0290330A | RECEIVER, GUN SLIDE, PKG'D |
| 290341A | THROTTLE CONTROL CABLE,PKGD |
| 779-147 | WIRE, TAP IN |
| 424-248 | FLANGED BEARING |
| 290380 | HOSE ASSY, HYD COMPENSATOR |
| 537620 | HOSE ASSY, HYD PRESSURE |
| 537919 | CHAIN, CUT TO LENGTH, 21" |
| 316-505 | HOSE, PAINT, AIRLESS |
| 316-533 | HOSE, PAINT, 6FT, ASE |
| 2405544 | GAUGE,35MPA/5000 PSI,REAR MOUNT |
| 759-414 | CLAMP, CABLE MOUNT, LC800 |
| 0528329A | BRACKET, MOUNTING, WELDMENT, PKGD |
| 2492700 | CAP, DUST, HOOSIER |
