Variable pitch fan to auto adjust for cooling and heating needs
Generac | MGG450, Mobile 360kW Gaseous Generator
MOBILE POWER • FLEXIBLE FUEL
MGG450, Mobile 360kW Gaseous Generator
Manufacturer: Generac
Model: MGG450
Category: Gaseous Mobile Power
A mobile gaseous power platform engineered for commercial and industrial applications where dependable output, field transport, and operational flexibility are essential. Review the key features and detailed configuration below for the Generac MGG450.
01
1500-hour service interval
02
Parallel/Load Share-Ready
03
Prime Rated 21.9L Generac Engine
04
Automatically adapts to LP, NG or Wellhead Fuel
Key Features
Performance and operating advantages
Key manufacturer-listed features are organized below for faster comparison and purchasing review.
Automatically adapts to LP, NG or Wellhead Fuel
Advanced fuel control system minimizes derate for fuel
Engine protection (knock sensing on each cylinder)
1500-hour service interval
Parallel/Load Share-Ready
Light weight and new trailer design for easier towing
Easy service access
Natural gas and wellhead gas provide most cost-effective fuel source availiable
450 kVA; Best in class kW/L (true 300 kWe COP)
Prime Rated 21.9L Generac Engine
Cold weather package designed for start in extreme cold situations
Technical Details
System configuration and standard equipment
Expand each section to review the available technical details from the existing manufacturer product information.
Additional Key Features+
- EPA Certified
- 49-state Emissions Compliant
Engine System+
- Dual-stage air cleaner
- Stainless steel flexible exhaust connection
- Factory filled (crankcase only) oil and coolant
- In-line engine block heater
- Disposable air filter - paper element
- Air filter restriction indicator
- Generac engine
- 12 Cylinder
- Turbocharged & Aftercooled
- 1,336 in3(21.9 L) Displacement
- Power @ 1,800 RPM -hp (kW) — Prime: 558 (416) — Continuous: 465 (347)
- Wrapped exhaust piping
- Engine oil replenishment system
- Oil drain extension
- Two 12V, 225 CCA, group 8D batteries
- Basic starting aids — Battery heater — Battery charger — 6 kW Coolant heater — Oil heater
- 10F Start/Run Ambient air temperature
Cooling System+
- Capable of operating at 104 °F (40 °C) ambient
- Exterior coolant drain
- Closed coolant recovery system
- UV/ozone resistant hoses
- 50/50 ethylene glycol antifreeze
- Radiator drain extension
Fuel System+
- Automatic changeover NG/LP
- Dual fuel shutoff solenoid
- Fuel line NPT connection
- Dual-stage scrubber
Ignition System+
- Cylinder-specific knock-detection sensors
- Automatic spark duration/intensity adjustment
- Automatic ignition timing adjustment
Control System+
- Motortech All-In-One digital controller
- 600A Main Line Circuit Breaker (MLCB)
- Battery disconnect
- Emergency stop
Generator+
- Heavy duty vibration isolation
- Fork pockets
- Push/pull drag skid capable
- End-mounted all-in-one generator control panel
- Motorized circuit breaker for parallel running
Alternator System+
- Leroy Somer™ LSA 47.2 S4 — Brushless — 4 Pole — 2/3 pitch — Class H insulation
- Digital AVR
- Skewed stator
- Permanent magnet Generator (PMG) excitation
- Sealed bearings
- Amortisseur winding
- Full load capacity alternator
- 60 Hz
Power Distribution+
- Connection Lugs
- Convenience Receptacles — Two 120V, 20A, GFCI Duplex Receptacles (NEMS 5-20R)
- Lockable lug box with safety switch — Trips main breaker when door is opened — Disables voltage regulator
Enclosure+
- Fully lockable – including doors
- Stainless steel hinges, door latches, and exterior hardware
- Exterior emergency stop switch
- Central lifting point
- Multi-lingual operating and safety decals
- Document holder with owner’s manual – includes AC and DC wiring diagrams
- Integrated single point lift structure; fork pockets in frame
- 4-point standard lifting
- Push-pull-drag points at all 4 corners
Warranty+
- 1 year / unlimited hours
Product specifications and available configurations may change. Confirm current requirements with HTS Supply before purchase.
Resources
Product documents
Open the available manufacturer document or request additional technical and submittal information.
Need documentation?Request the current specification sheet, submittal package, or configuration details from our sales team.
Need pricing, availability, or configuration help?
Send the model, quantity, delivery ZIP code, required date, and any application details. Our industrial sales team can prepare a formal quote and confirm the correct configuration.
