Diamond Products CC800M Block Saw 24” Honda® GX390 11 HP, 19.5 torque (lbs.-ft.) Gas - Part # 5800567, Cat # 81160
This block saw is designed for large-scale masonry cutting applications. It features a 24-inch blade capacity capable of cutting a 10-inch block in a single pass.
- Blade Capacity24in
- Max Cut Depth10in
- Arbor Diameter1in
01Features & Build
-
Gasoline and Electric Models
-
Gasoline and Electric Models
-
Operational Features
- 24-inch blade cuts 10-inch blocks in one pass
- Available in gasoline and electric power configurations
- Stay-level blade guard and enclosed blade shaft
- Replaceable cart travel rails
- 3/16-inch steel frame construction
- Includes water pump
- 16-inch by 25-inch aluminum cart with non-slip vulcanized rubber top
- Deep tapered water tray
- Foot pedal controlled head for hands-free material guidance
- Hand wheel for depth adjustment
- Enclosed cart wheels
- Forklift transport openings
- Dual V-belt power transmission
- Open back design for long material rip cuts
- Counterbalanced blade guard maintains parallel alignment
-
Technical Specifications
- 1-inch arbor diameter
- Flange block ball blade shaft bearings
- Dual premium grip notch V-belt drive
- Counterbalanced, spring-tensioned head pivot
- Dual spray tube coolant system
- 3-stage cyclone air filter on gasoline models
- 1-gallon fuel capacity on gasoline models
- High-temperature shut-off on electric models
- Recoil starter on gasoline models
02Specifications19
| Brand | Diamond Products |
|---|---|
| Model | CC800M |
| Part Number | 5800567 |
| Catalog Number | 81160 |
| Blade Capacity | 24” |
| Sawing Engine/Motor Make | Honda® GX390 |
| Motor/Engine Power | 11 HP, 19.5 torque (lbs.-ft.) |
| Electric Start | Yes |
| Power Source | Gas |
| Maximum Depth of Cut | 8” with 20” blade, 10” with 24” blade |
| Arbor Diameter | 1” |
| Blade Shaft Bearings | Flange block ball bearings |
| Blade Shaft Drive | 2 premium grip notch v-belt |
| Blade Raise/Lower | Counterbalanced, spring tensioned head pivots on two 1” flange block bearings |
| Blade Coolant | Dual spray tubes, pump fed (elecZZic models), garden hose connection (gas models) |
| Air Filter | 3-stage cyclone (gas models) |
| Fuel Capacitor | 1 gallon (gas models) |
| High Temp Shut-off | Included (elecZZic models) |
| Starter | Recoil on gas models, capacity on electric models |
Specifications are supplied by the manufacturer and are subject to change without notice.
03Related Products13
- 5800540CC800M Block Saw 20” Baldor® 5 HP-1PH, 230V Electric - Part # 5800540, Cat # 46820
- 5800541ACC800M Block Saw 20” Baldor® 5 HP-3PH, 230V Electric - Part # 5800541A, Cat # 96416
- 5800541BCC800M Block Saw 20” Baldor® 5 HP -3PH, 460V Electric - Part # 5800541B, Cat # 18533
- 5800542CC800M Block Saw 20” Baldor® 7.5 HP-1PH, 230V Electric - Part # 5800542, Cat # 47664
- 5800544ACC800M Block Saw 20” Baldor® 7.5 HP-3PH, 230V Electric - Part # 5800544A, Cat # 96015
- 5800544BCC800M Block Saw 20” Baldor® 7.5 HP-3PH, 460V Electric - Part # 5800544B, Cat # 96336
- 5800543CC800M Block Saw 24” Baldor® 7.5 HP-1PH, 230V Electric - Part # 5800543, Cat # 47630
- 5800545ACC800M Block Saw 24” Baldor® 7.5 HP-3PH, 230V Electric - Part # 5800545A, Cat # 97240
- 5800545BCC800M Block Saw 24” Baldor® 7.5 HP-3PH, 460V Electric - Part # 5800545B, Cat # 97000
- 5800546CC800M Block Saw 20” Honda® GX270 8 HP, 14.1 torque (lbs.-ft.) Gas - Part # 5800546, Cat # 47024
- 5800547CC800M Block Saw 20” Honda® GX390 11 HP, 19.5 torque (lbs.-ft.) Gas - Part # 5800547, Cat # 47047
- 5800548CC800M Block Saw 24” Honda® GX390 11 HP, 19.5 torque (lbs.-ft.) Gas - Part # 5800548, Cat # 47046
- 5800566CC800M Block Saw 20” Honda® GX390 11 HP, 19.5 torque (lbs.-ft.) Gas - Part # 5800566, Cat # 60933
Other configurations and accessories published for this product.
04Downloads2
05Shipping & Ordering
Machines ship by freight, quoted to the delivery address; contact us for a lift-gate or residential delivery quote before you order.
Need a volume price, a fleet configuration, or help matching this product to your application? Call us and we’ll spec it with you.
