Graco | SDU.A07AAA2AA0C21 SaniForce Ram Unit, Stainless Steel Frame, 1590 PTFE OM, Inflatable Seal, Enclosed Pneumatic Controls
Graco
Model: SDU.A07AAA2AA0C21
SaniForce Drum Unloader systems are designed for transferring thick food, personal care, and pharmaceutical ingredients. These systems achieve up to 99% evacuation rates, minimizing product waste. They can transfer products with viscosities up to 2,000,000 cps using sanitary high-pressure piston pumps. The ram systems enhance food safety by creating a sealed container environment and improve worker ergonomics by eliminating manual scooping and dumping. The inflatable seal accommodates various drum shapes and sizes. With options for pumps, controls, plates, and frames, these systems can be configured for most user applications.
This system offers high-pressure, sanitary unloading for ingredients and products up to 2,000,000 cps.
- Achieve up to 99% material evacuation to reduce waste.
- Enhance worker safety by eliminating manual scooping and dumping hazards.
- Improve food safety through a sealed container system and inflatable seal design, preventing airborne and worker contamination.
- The self-priming and run-dry pump capabilities are suitable for container unloading.
- Systems are configurable to meet the requirements of nearly any ingredient unloading application.
Operational Specifications
| Specification | Value |
|---|---|
| UPC Product | 755652880707 |
| Division | PRO |
| Height | 76.5 IN | 194.310 CM |
| Length | 35 IN | 88.900 CM |
| Width | 62 IN | 157.480 CM |
| Volume | 95.97 FT3 | 2.718 M3 |
| Shipping Weight | 643 LBS | 291.660 KG |
Technical Specifications
| Specification | Value |
|---|---|
| Compatible Drum Height (cm) | 101.6 |
| Compatible Drum Height (in) | 40 |
| Compatible Drum Height (mm) | 1016 |
| Compatible Drum Inside Diameter (cm) | 54.6-59.0 |
| Compatible Drum Inside Diameter (in) | 21.5-23.25 |
| Compatible Drum Inside Diameter (mm) | 546-590 |
| Control Panel Type | Enclosed |
| Maximum Air Inlet Pressure (bar) | 6.89 |
| Maximum Air Inlet Pressure (kg/cm²) | 7.03 |
| Maximum Air Inlet Pressure (kPa) | 690 |
| Maximum Air Inlet Pressure (psi) | 100 |
| Maximum Flow Rate (L/min) | 397 |
| Maximum Fluid Pressure (bar) | 6.9 |
| Maximum Fluid Pressure (kPa) | 690 |
| Maximum Fluid Pressure (psi) | 100 |
| Maximum Height (cm) | 295 |
| Maximum Height (ft) | 9.7 |
| Maximum Height (in) | 116 |
| Maximum Height (m) | 2.95 |
| Maximum Height (mm) | 2946 |
| Maximum Operating Temperature (°C) | 32 |
| Maximum Operating Temperature (°F) | 90 |
| Maximum Working Pressure (bar) | 6.9 |
| Maximum Working Pressure (kPa) | 690 |
| Maximum Working Pressure (psi) | 100 |
| Minimum Height (cm) | 194 |
| Minimum Height (ft) | 6.4 |
| Minimum Height (in) | 76.2 |
| Minimum Height (m) | 1.94 |
| Minimum Height (mm) | 1935 |
| Model | SaniForce 2.0 |
| Overall Depth (cm) | 69.8 |
| Overall Depth (in) | 27.5 |
| Overall Depth (mm) | 699 |
| Overall Width (cm) | 146 |
| Overall Width (in) | 57.5 |
| Overall Width (mm) | 1461 |
| Ram Material | Stainless Steel |
| Series | Drum Unloader |
| Weight (kg) | 264 |
| Ambient/Warm Melt/Hot Melt | 90 |
| Container Type | Drum |
| Maximum Working Pressure (MPa) | 0.7 |
| Material Container Volume (gal) | 55 |
| Material Container Volume (l) | 208 |
| Plate | Inflatable Seal Concave Plate, Drum (20 in. seal for use with 21.5 in. to 23.25 in. drums) |
| Seal Type | Inflatable |
| System Controller Type | Enclosed Pneumatic, SST Inflatable |
