Generac | MIH800, Mobile Indirect Heater, w/ Isuzu Engine
Generac Mobile Indirect Heater with Isuzu Engine
Generac Model: MIH800
Features:
- 3.0 L Isuzu® engine, FT4
- 475,000 BTU output*
- Max temperature output 180° F (82° C)
- 90%+ heater efficiency
- Hydraulic pump loop generates reliable heat in ambient temperatures down to -40° F/C
- 44-hour run time on one fuel fill
- Flameless technology produces heat without an open flame
- Safe to use in hazard zones in which ignitable fumes may be present
- Comprehensive safety alarms and shutdowns
- Positive air shutdown to prevent runaway engine
- Lockable cabinet to prevent tampering and theft
- 110% containment of engine fluids
- DOT and Transport Canada compliant
- Single-point controls
- Dual outlet ducts allow for separate duct runs and more versatile heating
- Internal duct storage for convenience, ease-of-transport and theft prevention
- Single axle trailer for increased maneuverability
- Roof strobe light indicates operating unit
- Interior cabinet lighting for enhanced visibility during maintenance
- No DEF required
Standard Features:
ENGINE SYSTEM
• Isuzu® 4JJ1T
• Diesel fueled
• EPA Final Tier 4
• 4-cylinder turbocharged
• 3.0 L displacement
• Power @ 2,000 rpm: 73 hp (54 kW)
• Air filter: Dry type cartridge
• Positive Air Shutoff - Electronic
FUEL SYSTEM
• Fuel tank capacity - US gal (L):
• Total: 173 (654.9)
• Usable: 160 (605)
• Fuel consumption rate: 3.55 gph (13.44 Lph)
• Minimum run time: 45 hr
• Fuel filter: Spin-on
COOLING SYSTEM
• Liquid cooled
• Capable of operating at -40 to 100°
F (-40 to 37.8°
C) ambient
• Coolant capacity: 6.3 qt (6.0 L)
ENGINE LUBRICATION SYSTEM
• Oil filter: Spin-on
• 500-hr service interval**
HEATER
• Type: Flameless, self-contained
• Heat produced: Up to 485,000 BTU/hr (142.1 kW/hr)
• Max Temperature: 180°
F (82.2°
C)
• Air flow: 2,650–5,500 ft3
/min (75–155.7m3
/min)
• Air discharge: Two 12 in (30.5 cm) outlets
• Efficiency: Up to 92%
• Heat transfer fluid (HTF):
• Pump: Variable displacement piston pump
• Tank capacity: 14 US gal (53 L)
• System capacity: 25 US gal (95 L)
• Hydraulic oil type: Mobile DTE10 ISO VG68
HYDRAULIC LOOP
• Pump: Metaris 63 cc variable displacement piston pump
• Two hydraulic oil filters – 9 and 20 microns
PROTECTION
• Self-contained
• Automatic shutdown for high hydraulic oil temperature, high
hydraulic oil pressure, engine over speed, low engine oil, low
fuel, and low hydraulic oil
• 110% containment
ENCLOSURE
• All steel construction. UV and fade resistant white polyester
powder paint
• Fully lockable – including control box door, service access
doors, and fuel fill
• Rear storage for two 12 in × 25 ft air ducts
• Operating and safety decals
• Document holder with owner’s manual – includes wiring
diagrams
• E-stop
TRAILER
• 2-5/16 in ball hitch – adjustable height
• Tongue jack
• Electric brakes
• Transportation tie downs
• Forklift tubes
• DOT approved lights: Tail, brakes, and directional lights
• One 6,000 lb (2,721.6 kg) axle
• Tires: ST235/80R16, 3,500 lb
• Plug adapter. Round 7 spade (SAE J2863)
CONTROLS
• Murphy controller- PV450
• TFT color graphic LCD display with LED backlight
BATTERIES
• Two 12 V, 950 CCA, wet cell batteries
• Electrical system rating: 12 V
OPTIONS*
• Spare tire and carrier
• 60/40 coolant
• One 20 in (50.8 cm) air discharge outlet
• 3 in. pintle ring – adjustable height
• Transport Canada - Please Call
