Graco | SP4F.0072 SaniForce 4150, 4" HS SST Pneumatic Diaphragm Pump, SS Center, FL Checks, BN Diaphragms
Graco
Model: SP4F.0072
The Graco SaniForce 4150 is a 4-inch air-operated double diaphragm (AODD) pump designed for hygienic fluid transfer. It delivers flow rates up to 90 gpm and features a quick knock-down design for simplified cleaning and a low cost of ownership.
This pump is suitable for the food processing and personal care industries. It is commonly used for high-volume evacuation of liquid concentrates from holding tanks and for repackaging fluids from original containers into smaller ones. It can handle products such as flavorings, purees, sauces, and other low to medium viscosity materials.
- 4-inch sanitary pump with flow rates up to 90 gpm (340 lpm) and pressures up to 120 psi (8 bar).
- The seal-less diaphragm pump design prevents leaks and failures caused by running the pump dry.
- Graco double diaphragm pumps stall under pressure, preventing failures due to clogged lines or closed valves.
- Externally serviceable air valves provide high efficiency and minimize downtime.
- Constructed with a 316L stainless steel wetted section.
- All fluid contact materials comply with FDA regulations and meet United States Code of Federal Regulations (CFR) Title 21.
- The flapper check valve allows passage of solids up to 3.8 inches (96.5 mm).
- Single-piece manifolds reduce the need for tri-clamps and gaskets, promoting a cleaner fluid path and design.
Operational Specifications
| Specification | Value |
|---|---|
| UPC Product | 769946021134 |
| Division | PRO |
| Height | 0 IN | 0.000 CM |
| Length | 0 IN | 0.000 CM |
| Width | 0 IN | 0.000 CM |
| Volume | 0 FT3 | 0.000 M3 |
| Shipping Weight | 0 LBS | 0.000 KG |
Technical Specifications
| Specification | Value |
|---|---|
| Air Exhaust Port Size (in) | 3/4 |
| Air Exhaust Port Thread Gender | Female |
| Air Inlet Size (in) | 1/2 |
| Air Inlet Thread Gender | Female |
| For Use With | Food and Personal Care |
| Maximum Air Consumption (SCFM) | 235 |
| Maximum Air Pressure (bar) | 8 |
| Maximum Air Pressure (kPa) | 800 |
| Maximum Air Pressure (psi) | 120 |
| Maximum Cycle Rate (CPM) | 225 |
| Maximum Flow Rate (L/min) | 340 |
| Maximum Fluid Pressure (bar) | 8 |
| Maximum Fluid Pressure (kPa) | 800 |
| Maximum Fluid Pressure (psi) | 120 |
| Maximum Solid Size (cm) | 9.65 |
| Maximum Solid Size (in) | 3.8 |
| Maximum Solid Size (mm) | 96.5 |
| Model | SaniForce |
| Overall Height (in) | 19.9 |
| Series | 4150 HS |
| Maximum Fluid Pressure (MPa) | 0.8 |
| Maximum Air Pressure (MPa) | 0.8 |
| Maximum Fluid Operating Temperature (°C) | 82 |
| Minimum Fluid Operating Temperature (°C) | -12 |
| Maximum Fluid Operating Temperature (°F) | 180 |
| Minimum Fluid Operating Temperature (°F) | 10 |
| Surface Finish | 32 Ra |
| compressor_required | Yes |
| Fluid Passage Size (in) | 4 |
| Fluid Passage Size (mm) | 100 |
| Tri-Clamp Connection Size | 4-inch |
| fluid_passage_size_cm | 10 |
| configuration_code | 4150HS.PS01ASSGFL-BNBN21 |
