Graco | SP4F.0052 SaniForce 4150, 4" HS SST Pneumatic Diaphragm Pump, SS Center, FL Checks, PO Diaphragms
Graco
Model: SP4F.0052
The Graco SaniForce 4150 is a 4-inch air-operated double diaphragm (AODD) pump designed for hygienic fluid transfer. It delivers flow rates up to 90 gallons per minute (340 liters per minute) and offers a quick knock-down design for simplified cleaning, contributing to a low cost of ownership.
This pump is suitable for the food processing and personal care industries. Typical uses include high-volume transfer of liquid concentrates from storage tanks or repackaging fluids from original containers into smaller ones. It can effectively pump materials such as flavorings, purees, sauces, and other low to medium viscosity substances.
- 4-inch sanitary pump with a maximum flow rate of 90 gpm (340 lpm) and a maximum pressure of 120 psi (8 bar).
- The seal-less diaphragm pump design prevents leaks and failures caused by dry running.
- Graco double diaphragm pumps are designed to stall under pressure, preventing failures due to blocked lines or closed valves.
- Externally serviceable air valves provide high efficiency and minimize downtime.
- The PTFE/EPDM overmolded diaphragm design reduces areas where bacteria can accumulate, enhances wear resistance, and extends diaphragm life by eliminating exposed diaphragm plates on the fluid side.
- Features a 316L stainless steel wetted section.
- All fluid contact materials comply with FDA regulations and United States Code of Federal Regulations (CFR) Title 21.
- The flapper check valve allows passage of solids up to 3.8 inches (96.5 mm).
- Single-piece manifolds reduce the number of tri-clamps and gaskets, creating a cleaner fluid path and design.
Operational Specifications
| Specification | Value |
|---|---|
| UPC Product | 755652880349 |
| Division | PRO |
| Height | 0 IN | 0.000 CM |
| Length | 0 IN | 0.000 CM |
| Width | 0 IN | 0.000 CM |
| Volume | 0 FT3 | 0.000 M3 |
| Shipping Weight | 0 LBS | 0.000 KG |
Technical Specifications
| Specification | Value |
|---|---|
| Air Exhaust Port Size (in) | 3/4 |
| Air Exhaust Port Thread Gender | Female |
| Air Inlet Size (in) | 1/2 |
| Air Inlet Thread Gender | Female |
| For Use With | Food, Personal Care |
| Maximum Air Consumption (SCFM) | 235 |
| Maximum Air Pressure (bar) | 8 |
| Maximum Air Pressure (kPa) | 800 |
| Maximum Air Pressure (psi) | 120 |
| Maximum Cycle Rate (CPM) | 225 |
| Maximum Flow Rate (L/min) | 340 |
| Maximum Fluid Pressure (bar) | 8 |
| Maximum Fluid Pressure (kPa) | 800 |
| Maximum Fluid Pressure (psi) | 120 |
| Maximum Solid Size (cm) | 9.65 |
| Maximum Solid Size (in) | 3.8 |
| Maximum Solid Size (mm) | 96.5 |
| Model | SaniForce |
| Overall Height (in) | 19.9 |
| Series | 4150 HS |
| Maximum Fluid Pressure (MPa) | 0.8 |
| Maximum Air Pressure (MPa) | 0.8 |
| Maximum Fluid Operating Temperature (°C) | 82 |
| Minimum Fluid Operating Temperature (°C) | -40 |
| Maximum Fluid Operating Temperature (°F) | 180 |
| Minimum Fluid Operating Temperature (°F) | -40 |
| Surface Finish | 32 Ra |
| compressor_required | Yes |
| Fluid Passage Size (in) | 4 |
| Fluid Passage Size (mm) | 100 |
| Tri-Clamp Connection Size | 4-inch |
| fluid_passage_size_cm | 10 |
| configuration_code | 4150HS.PS01ASSGFL-POEP21 |
