Graco | SP3F.0000 SaniForce 3150, 3" HS SST Pneumatic Diaphragm Pump, SS Center, FL Checks, EO Diaphragms
Graco
Model: SP3F.0000
The Graco SaniForce 3150 is a 3-inch air-operated double diaphragm (AODD) pump designed for hygienic fluid transfer. It delivers flow rates up to 130 gpm and features a quick knock-down design for simplified cleaning and a low cost of ownership.
This pump is suitable for the food processing and personal care industries. It is commonly used for high-volume evacuation of liquid concentrates from storage vessels or for repackaging fluids from original containers into smaller ones. It can effectively pump materials such as flavorings, purees, sauces, and other low to medium viscosity products.
- 3-inch sanitary pump with flow rates up to 130 gpm (492 lpm) and pressures up to 120 psi (8 bar).
- The seal-less diaphragm pump design prevents leaks and failures caused by running the pump dry.
- Graco double diaphragm pumps are designed to stall under pressure, preventing failures due to clogged lines or closed valves.
- Externally serviceable air valves provide high efficiency and minimize downtime.
- Features inlet and outlet tri-clamp connections for a quick knockdown design, facilitating easy cleaning and maintenance.
- The EPDM overmolded diaphragm design reduces areas where bacteria can accumulate, enhancing wear resistance and diaphragm lifespan without an exposed diaphragm plate on the fluid side.
- Constructed with a 316L stainless steel wetted section.
- All fluid contact materials comply with FDA regulations and United States Code of Federal Regulations (CFR) Title 21.
- The flapper check valve allows passage of solids up to 2.46 inches (62.5 mm).
- Single-piece manifolds reduce the number of tri-clamps and gaskets, creating a cleaner fluid path and design.
Operational Specifications
| Specification | Value |
|---|---|
| UPC Product | 755652878704 |
| Division | PRO |
| Height | 49 IN | 124.460 CM |
| Length | 33 IN | 83.820 CM |
| Width | 27 IN | 68.580 CM |
| Volume | 25.266 FT3 | 0.715 M3 |
| Shipping Weight | 165 LBS | 74.843 KG |
Technical Specifications
| Specification | Value |
|---|---|
| Air Exhaust Port Size (in) | 3/4 |
| Air Exhaust Port Thread Gender | Female |
| Air Inlet Size (in) | 1/2 |
| Air Inlet Thread Gender | Female |
| For Use With | Food, Personal Care |
| Maximum Air Consumption (SCFM) | 220 |
| Maximum Air Pressure (bar) | 8 |
| Maximum Air Pressure (kPa) | 800 |
| Maximum Air Pressure (psi) | 120 |
| Maximum Cycle Rate (CPM) | 180 |
| Maximum Flow Rate (L/min) | 492 |
| Maximum Fluid Pressure (bar) | 8 |
| Maximum Fluid Pressure (kPa) | 800 |
| Maximum Fluid Pressure (psi) | 120 |
| Maximum Solid Size (cm) | 6.25 |
| Maximum Solid Size (in) | 2.46 |
| Maximum Solid Size (mm) | 62.5 |
| Model | SaniForce |
| Overall Height (in) | 39.5 |
| Series | 3150 HS |
| Maximum Fluid Pressure (MPa) | 0.8 |
| Maximum Air Pressure (MPa) | 0.8 |
| Maximum Fluid Operating Temperature (°C) | 121 |
| Minimum Fluid Operating Temperature (°C) | -40 |
| Maximum Fluid Operating Temperature (°F) | 250 |
| Minimum Fluid Operating Temperature (°F) | -40 |
| Surface Finish | 32 Ra |
| compressor_required | Yes |
| Fluid Passage Size (in) | 3 |
| Fluid Passage Size (mm) | 76 |
| Tri-Clamp Connection Size | 3-inch |
| fluid_passage_size_cm | 7.6 |
| configuration_code | 3150HS.PS01ASSAFL-EOEP21 |
