Graco | SP3B.0006 SaniForce 3250, 3" HS SST Pneumatic Diaphragm Pump, Poly Center, SS Seats, PT Balls, EO Diaphragms
Graco
Model: SP3B.0006
Graco's SaniForce 3250 is a 3-inch air-operated double diaphragm (AODD) pump designed for hygienic fluid transfer. It supports flow rates up to 230 gpm and features a quick knock-down design for simplified cleaning and a low cost of ownership.
This pump is suitable for food processing and personal care applications. It is commonly used for high-volume evacuation of liquid concentrates from holding vessels or for repackaging fluids into smaller containers. It can effectively pump materials such as flavorings, purees, sauces, and other low to medium viscosity products.
- 3-inch sanitary pump with flow rates up to 230 gpm (870 lpm) and pressures up to 100 psi (6.9 bar).
- Seal-less diaphragm design prevents leaks and failures caused by dry running.
- Graco double diaphragm pumps stall under pressure, preventing failures from clogged lines or closed valves.
- Externally serviceable air valves provide high efficiency and minimize downtime.
- Features inlet and outlet tri-clamp connections for a quick knockdown design, facilitating easy cleaning and rapid maintenance.
- EPDM overmolded diaphragm design minimizes areas where bacteria can accumulate and enhances diaphragm wear and lifespan, with no exposed diaphragm plate on the fluid side.
- Optional leak sensors alert users to potential process compromises.
- Constructed with a 316L stainless steel wetted section.
- All fluid contact materials comply with FDA regulations and United States Code of Federal Regulations (CFR) Title 21.
- Capable of passing solids up to 0.75 inches (19 mm).
Operational Specifications
| Specification | Value |
|---|---|
| UPC Product | 755652877295 |
| Division | PRO |
| Height | 49 IN | 124.460 CM |
| Length | 28 IN | 71.120 CM |
| Width | 33.75 IN | 85.725 CM |
| Volume | 26.797 FT3 | 0.759 M3 |
| Shipping Weight | 170 LBS | 77.111 KG |
Technical Specifications
| Specification | Value |
|---|---|
| Air Exhaust Port Size (in) | 3/4 |
| Air Exhaust Port Thread Gender | Female |
| Air Inlet Size (in) | 3/4 |
| Air Inlet Thread Gender | Female |
| For Use With | Food, Personal Care |
| Maximum Air Consumption (SCFM) | 290 |
| Maximum Air Pressure (bar) | 6.9 |
| Maximum Air Pressure (kPa) | 690 |
| Maximum Air Pressure (psi) | 100 |
| Maximum Cycle Rate (CPM) | 190 |
| Maximum Flow Rate (L/min) | 870 |
| Maximum Fluid Pressure (bar) | 6.9 |
| Maximum Fluid Pressure (kPa) | 690 |
| Maximum Fluid Pressure (psi) | 100 |
| Maximum Solid Size (cm) | 1.9 |
| Maximum Solid Size (in) | 0.75 |
| Maximum Solid Size (mm) | 19 |
| Model | SaniForce |
| Overall Height (in) | 38.6 |
| Series | 3250 HS |
| Maximum Fluid Pressure (MPa) | 0.69 |
| Maximum Air Pressure (MPa) | 0.69 |
| Maximum Fluid Operating Temperature (°C) | 104 |
| Minimum Fluid Operating Temperature (°C) | -40 |
| Maximum Fluid Operating Temperature (°F) | 220 |
| Minimum Fluid Operating Temperature (°F) | -40 |
| Surface Finish | 32 Ra |
| compressor_required | Yes |
| Fluid Passage Size (in) | 3 |
| Fluid Passage Size (mm) | 76 |
| Tri-Clamp Connection Size | 3-inch |
| fluid_passage_size_cm | 7.6 |
| configuration_code | 3250HS.PP01ASSASSPTEOEP21 |
