Graco | SP15.0176 SaniForce 1590, 1.5" PH SST Pneumatic Diaphragm Pump, SS Center, SS Seats, EP Balls, EO Diaphragms
Graco
Model: SP15.0176
The Graco SaniForce 1590 is a 1.5-inch air-operated double diaphragm (AODD) pump designed for hygienic fluid transfer. It delivers flow rates up to 105 gpm and features a quick knock-down design for simplified cleaning and a low cost of ownership.
This pump is suitable for the food processing and personal care industries. It is commonly used for high-volume evacuation of liquid concentrates from storage vessels or for repackaging fluids into smaller containers. The pump can handle products such as flavorings, purees, sauces, and other low to medium viscosity materials.
- 1.5-inch sanitary pump with a maximum flow rate of 105 gpm (397.5 lpm) and a maximum pressure of 120 psi (8 bar).
- Seal-less diaphragm pump design prevents leaks and failures caused by running the pump dry.
- Graco double diaphragm pumps are designed to stall under pressure, preventing failures due to blocked lines or closed valves.
- Externally serviceable air valves enhance efficiency and minimize downtime.
- Features inlet and outlet tri-clamp connections for a quick knockdown design, facilitating easy cleaning and maintenance.
- EPDM overmolded diaphragm design reduces areas where bacteria can accumulate, while improving wear resistance and diaphragm lifespan. The fluid side has no exposed diaphragm plate.
- Includes a leak sensor to alert users of potential process compromises.
- Constructed with a 316L stainless steel wetted section.
- All fluid contact materials comply with FDA regulations and United States Code of Federal Regulations (CFR) Title 21.
- Capable of pumping solids up to 0.5 inches (12.7 mm) in diameter.
Operational Specifications
| Specification | Value |
|---|---|
| UPC Product | 755652998525 |
| Division | PRO |
| Height | 0 IN | 0.000 CM |
| Length | 0 IN | 0.000 CM |
| Width | 0 IN | 0.000 CM |
| Volume | 0 FT3 | 0.000 M3 |
| Shipping Weight | 0 LBS | 0.000 KG |
Technical Specifications
| Specification | Value |
|---|---|
| Air Exhaust Port Size (in) | 3/4 |
| Air Exhaust Port Thread Gender | Female |
| Air Inlet Size (in) | 1/2 |
| Air Inlet Thread Gender | Female |
| For Use With | Food, Personal Care, Pharmaceutical |
| Maximum Air Consumption (SCFM) | 150 |
| Maximum Air Pressure (bar) | 8 |
| Maximum Air Pressure (kPa) | 800 |
| Maximum Air Pressure (psi) | 120 |
| Maximum Cycle Rate (CPM) | 165 |
| Maximum Flow Rate (L/min) | 397.5 |
| Maximum Fluid Pressure (bar) | 8 |
| Maximum Fluid Pressure (kPa) | 800 |
| Maximum Fluid Pressure (psi) | 120 |
| Maximum Solid Size (cm) | 1.27 |
| Maximum Solid Size (in) | 0.5 |
| Maximum Solid Size (mm) | 12.7 |
| Model | SaniForce |
| Overall Height (in) | 32.6 |
| Series | 1590 HS |
| Maximum Fluid Pressure (MPa) | 0.8 |
| Maximum Air Pressure (MPa) | 0.8 |
| Maximum Fluid Operating Temperature (°C) | 121 |
| Minimum Fluid Operating Temperature (°C) | -40 |
| Maximum Fluid Operating Temperature (°F) | 250 |
| Minimum Fluid Operating Temperature (°F) | -40 |
| Surface Finish | 32 Ra |
| compressor_required | Yes |
| Fluid Passage Size (in) | 1.5 |
| Fluid Passage Size (mm) | 38 |
| Tri-Clamp Connection Size | 1.5-inch |
| fluid_passage_size_cm | 3.8 |
| configuration_code | 1590PH.PS03ASSASSEPEOEP31 |
