Graco | FFLP510 Fine Finish Low Pressure RAC X FF LP SwitchTip, 510
Graco
Model: FFLP510
The Reverse-A-Clean (RAC) 510 Fine Finish Low Pressure (FF LP) RAC X SwitchTip sprays at up to 50% lower pressure. This tip creates a 10 to 12 inch fan pattern with a 0.010 inch orifice, suitable for finishing materials. The tip can be reversed to clear clogs easily.
Designed for fine finish applications.
-
Reduced Prep & Cleanup Time
- Minimizes mess with less overspray.
- Ensures paint application is precise.
-
Simplified Pattern Overlap
- Features a softer spray fan pattern.
- Facilitates easy application of any material to any surface.
- Delivers a consistent, blended finish.
-
Extended Tip Lifespan
- Spraying at half pressure doubles the tip's operational life.
- Reduces sprayer maintenance, extending life by up to 2 times.
-
SmartTip Technology
- Incorporates exclusive internal tip geometry.
- Decreases the energy needed to atomize paints, stains, and other materials.
- Achieves a superior finish with reduced pressure.
- Compatible with SmartControl on select Graco sprayers.
-
Market-Leading Tip Performance
- Works with all airless sprayers.
- Offers the longest-lasting fan pattern.
- Provides the highest quality finish with a consistent spray pattern.
-
Clear Tip Size Identification
- Large, raised tip size numbers remain legible even when covered in paint.
-
Advanced Tip Design
- A locking tab secures the tip firmly within the guard.
- Allows the tip to snap into either the spray or reverse position.
- The OneSeal tip gasket installs without tools.
- A solvent seal is available for use with extremely hot solvents.
Operational Specifications
| Specification | Value |
|---|---|
| UPC Product | 755652394464 |
| Division | CED |
| Height | .85 IN | 2.159 CM |
| Length | 5.25 IN | 13.335 CM |
| Width | 2.7 IN | 6.858 CM |
| Volume | .007 FT3 | 0.000 M3 |
| Shipping Weight | .07 LBS | 0.032 KG |
Technical Specifications
| Specification | Value |
|---|---|
| Orifice Diameter (in) | 0.010 |
| Maximum Working Pressure (kPa) | 28000 |
| Maximum Working Pressure (psi) | 4050 |
| Maximum Working Pressure (bar) | 280 |
| For Use With | RAC X HandTite Tip Guard |
| Maximum Fan Width (in) | 10 |
| Maximum Fan Width (mm) | 305 |
| Tip Type | Airless |
| Pattern Size (in) | 10 to 12 |
| Maximum Fan Width (cm) | 25 |
| Maximum Flow Rate (L/min) | 0.42 |
| Minimum Fan Width (in) | 10 |
| Minimum Fan Width (mm) | 254 |
| Pattern Size (mm) | 254 to 304.8 |
| Model | RAC X |
| Series | FF LP SwitchTip |