Graco | FFLP412 Fine Finish Low Pressure RAC X FF LP SwitchTip, 412
Minimum Order Notice
Graco: $400 minimum order
Graco
Model: FFLP412
The Reverse-A-Clean (RAC) 412 Fine Finish Low Pressure (FF LP) RAC X SwitchTip sprays at up to 50% lower pressure. This fine finish tip creates an 8 to 10 inch fan pattern with a 0.012 inch orifice, suitable for finishing materials. The tip can be reversed to clear clogs.
Designed for fine finish applications.
- Reduced Preparation and Cleanup Time
- Minimizes mess due to less overspray.
- Directs paint application precisely where needed.
- Simplified Pattern Overlap
- Features a softer spray fan pattern.
- Facilitates easy application of any material to any surface.
- Ensures consistent, blended finish quality.
- Extended Tip Lifespan
- Spraying at half pressure doubles the tip's operational life.
- Decreases sprayer maintenance requirements, extending life up to 2X.
- SmartTip Technology
- Incorporates exclusive internal tip geometry.
- Reduces the energy needed to atomize paints, stains, and other materials.
- Delivers a superior finish with reduced pressure.
- Compatible with SmartControl on select Graco sprayers.
- Premium Tip Performance
- Compatible with all airless sprayers.
- Offers the longest-lasting fan pattern.
- Achieves the highest quality finish with a consistent spray pattern.
- Clear Tip Size Identification
- Large, raised tip size numbers remain legible even when covered in paint.
- Advanced Tip Design
- A locking tab ensures the tip remains securely in the guard.
- Allows the tip to be snapped into either the spray or reverse position.
- The OneSeal tip gasket installs without tools.
- A solvent seal is available for use with extremely hot solvents.
Operational Specifications
| Specification | Value |
|---|---|
| UPC Product | 755652394440 |
| Division | CED |
| Height | 1 IN | 2.540 CM |
| Length | 5.3 IN | 13.462 CM |
| Width | 2.65 IN | 6.731 CM |
| Volume | .008 FT3 | 0.000 M3 |
| Shipping Weight | .09 LBS | 0.041 KG |
Technical Specifications
| Specification | Value |
|---|---|
| Orifice Diameter (in) | 0.012 |
| Maximum Working Pressure (kPa) | 28000 |
| Maximum Working Pressure (psi) | 4050 |
| Maximum Working Pressure (bar) | 280 |
| For Use With | RAC X HandTite Tip Guard |
| Maximum Fan Width (in) | 8 |
| Maximum Fan Width (mm) | 254 |
| Tip Type | Airless |
| Pattern Size (in) | 8 to 10 |
| Maximum Fan Width (cm) | 20 |
| Maximum Flow Rate (L/min) | 0.57 |
| Minimum Fan Width (in) | 8 |
| Minimum Fan Width (mm) | 203 |
| Pattern Size (mm) | 203.2 to 254 |
| Model | RAC X |
| Series | FF LP SwitchTip |
