Graco | FFLP214 Fine Finish Low Pressure RAC X FF LP SwitchTip, 214
Minimum Order Notice
Graco: $400 minimum order
Graco
Model: FFLP214
The Reverse-A-Clean (RAC) 214 Fine Finish Low Pressure (FF LP) RAC X SwitchTip sprays at up to 50% lower pressure. This tip produces a 4 to 6 inch fan pattern with a 0.014 inch orifice, suitable for finishing materials. The tip can be reversed to clear clogs.
Designed for fine finish applications.
- Reduced Prep & Cleanup Time
- Minimizes mess due to less overspray.
- Ensures paint is applied precisely where intended.
- Simplified Pattern Overlap
- Features a softer spray fan pattern.
- Facilitates easy application of any material to any surface.
- Provides consistent, blended finish quality.
- Extended Durability
- Spraying at half pressure doubles the tip's lifespan.
- Reduces sprayer maintenance, extending life by up to 2 times.
- SmartTip Technology
- Incorporates exclusive internal tip geometry.
- Decreases the energy required to atomize paints, stains, and other materials.
- Delivers a superior finish with reduced pressure.
- Compatible with SmartControl on select Graco sprayers.
- Premium Tip Performance
- Works with any airless sprayer.
- Offers the longest-lasting fan pattern.
- Achieves the highest quality finish with a consistent spray pattern.
- Clear Tip Size Identification
- Large, raised tip size numbers remain legible, even when covered in paint.
- Advanced Tip Design
- A locking tab secures the tip in the guard.
- Allows the tip to be snapped into spray or reverse positions.
- The OneSeal tip gasket installs without tools.
- A solvent seal is available for use with extremely hot solvents.
Operational Specifications
| Specification | Value |
|---|---|
| UPC Product | 755652404149 |
| Division | CED |
| Height | 1 IN | 2.540 CM |
| Length | 5.3 IN | 13.462 CM |
| Width | 2.7 IN | 6.858 CM |
| Volume | .008 FT3 | 0.000 M3 |
| Shipping Weight | .09 LBS | 0.041 KG |
Technical Specifications
| Specification | Value |
|---|---|
| Orifice Diameter (in) | 0.014 |
| Maximum Working Pressure (kPa) | 28000 |
| Maximum Working Pressure (psi) | 4050 |
| Maximum Working Pressure (bar) | 280 |
| For Use With | RAC X HandTite Tip Guard |
| Maximum Fan Width (in) | 4 |
| Maximum Fan Width (mm) | 152 |
| Tip Type | Airless |
| Pattern Size (in) | 4 to 6 |
| Maximum Fan Width (cm) | 10 |
| Maximum Flow Rate (L/min) | 0.79 |
| Minimum Fan Width (in) | 4 |
| Minimum Fan Width (mm) | 102 |
| Pattern Size (mm) | 101.6 to 152.4 |
| Model | RAC X |
| Series | FF LP SwitchTip |
