Graco | 25D295 T3 Complete Package: Includes 2 Pumps (Carbon Steel), 2 Supply Hoses, Air Supply Kit and Desicant Dryer Kit
Graco
Model: 25D295
Transfer Pumps are necessary for moving A and B materials to the Reactor Spray Systems. The T3 Transfer Pump integrates Graco’s established Merkur air-motor with the widely used T2 stainless steel lower. This pump operates at a 3:1 ratio, utilizing reduced air pressure to achieve the required fluid pressure.
- Easier Maneuverability: The T3's overall height is 3.7 inches (9.4 cm) less above the drum compared to the T2, facilitating easier removal from the drum within a spray rig.
- Reduced Noise: Studies indicate the T3 Transfer Pump operates approximately 3 times quieter than the T2 Transfer Pump.
- Lower Maintenance: The Merkur air-motor features air pilot valve technology, ensuring pneumatic air-motor switching. This contrasts with the T1 and T2 Transfer Pumps, which employ a mechanical reversing mechanism in their air-motors.
Operational Specifications
| Specification | Value |
|---|---|
| UPC Product | 755652695271 |
| Division | CED |
Technical Specifications
| Specification | Value |
|---|---|
| Air Inlet Size (in) | 1/4 |
| Air Inlet Size (mm) | 6.35 |
| Air Inlet Thread Gender | Female |
| Cycles Per Gallon | 30 |
| Fluid Outlet Size (mm) | 19.05 |
| Fluid Outlet Thread Gender | Female |
| Includes | Fluid Supply Kit, Air Hose Kit |
| Maximum Air Inlet Pressure (bar) | 6.9 |
| Maximum Air Inlet Pressure (kPa) | 690 |
| Maximum Air Inlet Pressure (psi) | 100 |
| Maximum Flow Rate (L/min) | 17.03 |
| Maximum Operating Temperature (°C) | 88 |
| Maximum Operating Temperature (°F) | 190 |
| Maximum Working Pressure (bar) | 21.7 |
| Maximum Working Pressure (kPa) | 2170 |
| Maximum Working Pressure (psi) | 315 |
| Model | T3 |
| Series | Carbon Steel |
| Sound Pressure Level (dB(A)) | 72.9 |
| Weight (kg) | 10 |
| Maximum Working Pressure (MPa) | 2.2 |
| Maximum Air Inlet Pressure (MPa) | 0.69 |
