Graco | 24P079 GS35 Plug-Free Hot Melt Applicator with 4 Modules 24VDC Solenoid Pt 100 RTD (SA4A088150088)
Graco
Model: 24P079
The InvisiPac Hot Melt Adhesive Applicators provide efficient operation and increased uptime. Their innovative free-flow manifold design and integrated applicator filtering prevent nozzle blockages. Available in compact and custom configurations, they are adaptable to your specific application requirements.
The GS35 is a plug-free hot melt adhesive dispensing nozzle designed for case and carton sealing.
-
Free Flow Manifold
- Reaches operating temperature in under 10 minutes.
- The manifold filter is located within a heated zone, ensuring consistent adhesive application by preventing cold spots.
- The manifold filter captures debris and char, which are removed upon filter replacement.
-
Free-Flow Path
- Engineered to eliminate dead zones where char can accumulate.
-
Integrated Module Filter
- This design safeguards the ball and seat from debris and char.
- Prevents nozzle plugging when used with the InvisiPac System.
-
GS35: Plug-free applicator for consistent bead applications
- Features: Air-actuated open, spring-loaded close.
- Cycle rate: 3500 cycles per minute.
- Available in single, dual, quad, and custom designs.
Operational Specifications
| Specification | Value |
|---|---|
| UPC Product | 633955300200 |
| Division | IPD |
| Height | 6.5 IN | 16.510 CM |
| Length | 10 IN | 25.400 CM |
| Width | 14 IN | 35.560 CM |
| Volume | .527 FT3 | 0.015 M3 |
| Shipping Weight | 7.16 LBS | 3.248 KG |
Technical Specifications
| Specification | Value |
|---|---|
| Ambient/Warm Melt/Hot Melt | Hot Melt |
| For Use With | InvisiPac GS35 Plug-Free |
| Includes | (2) Heaters |
| Maximum Air Pressure (bar) | 5.5 |
| Maximum Air Pressure (kg/cm²) | 6 |
| Maximum Air Pressure (kPa) | 550 |
| Maximum Air Pressure (MPa) | 0.5 |
| Maximum Air Pressure (psi) | 80 |
| Maximum Fluid Pressure (bar) | 103 |
| Maximum Fluid Pressure (kg/cm²) | 105 |
| Maximum Fluid Pressure (kPa) | 10300 |
| Maximum Fluid Pressure (MPa) | 10.3 |
| Maximum Fluid Pressure (psi) | 1500 |
| Minimum Air Inlet Pressure (bar) | 2.7 |
| Minimum Air Inlet Pressure (kg/cm²) | 3 |
| Minimum Air Inlet Pressure (kPa) | 270 |
| Minimum Air Inlet Pressure (MPa) | 0.3 |
| Minimum Air Inlet Pressure (psi) | 40 |
| Series | GS35 Plug-Free |
| number_of_modules | 4 |
| Model | InvisiPac |
