Graco | SP4F.0024 SaniForce 4150, 4" HS SST Pneumatic Diaphragm Pump, SS Center, FL Checks, EO Diaphragms
Graco
Model: SP4F.0024
The Graco SaniForce 4150 is a 4-inch air-operated double diaphragm (AODD) pump designed for hygienic fluid transfer, capable of delivering flow rates up to 90 gpm. Its quick knock-down design facilitates easy cleaning, and it offers a low cost of ownership.
This pump is suitable for the food processing and personal care industries. It is commonly used for high-volume evacuation of liquid concentrates from storage vessels or for repackaging fluids from original containers into smaller ones. It can effectively pump materials such as flavorings, purees, sauces, and other low to medium viscosity liquids.
- A 4-inch sanitary pump with a maximum flow rate of 90 gpm (340 lpm) and a maximum pressure of 120 psi (8 bar).
- The seal-less diaphragm pump design prevents leaks and failures caused by running the pump dry.
- Graco double diaphragm pumps stall when pressure is met, preventing failures from blocked lines or closed valves.
- Externally serviceable air valves provide high efficiency and minimize downtime.
- Features inlet and outlet tri-clamp connections for a quick knockdown design, enabling easy cleaning and rapid maintenance.
- The EPDM overmolded diaphragm design minimizes areas where bacteria can accumulate, while enhancing wear resistance and diaphragm lifespan. There is no exposed diaphragm plate on the fluid side.
- Constructed with a 316L stainless steel wetted section.
- All fluid contact materials comply with FDA regulations and meet the United States Code of Federal Regulations (CFR) Title 21.
- The flapper check allows for the passage of solids up to 3.8 inches (96.5 mm).
- Single-piece manifolds reduce the number of tri-clamps and gaskets, resulting in a cleaner fluid path and design.
Operational Specifications
| Specification | Value |
|---|---|
| UPC Product | 755652880066 |
| Division | PRO |
| Height | 0 IN | 0.000 CM |
| Length | 0 IN | 0.000 CM |
| Width | 0 IN | 0.000 CM |
| Volume | 0 FT3 | 0.000 M3 |
| Shipping Weight | 0 LBS | 0.000 KG |
Technical Specifications
| Specification | Value |
|---|---|
| Air Exhaust Port Size (in) | 3/4 |
| Air Exhaust Port Thread Gender | Female |
| Air Inlet Size (in) | 1/2 |
| Air Inlet Thread Gender | Female |
| For Use With | Food, Personal Care |
| Maximum Air Consumption (SCFM) | 235 |
| Maximum Air Pressure (bar) | 8 |
| Maximum Air Pressure (kPa) | 800 |
| Maximum Air Pressure (psi) | 120 |
| Maximum Cycle Rate (CPM) | 225 |
| Maximum Flow Rate (L/min) | 340 |
| Maximum Fluid Pressure (bar) | 8 |
| Maximum Fluid Pressure (kPa) | 800 |
| Maximum Fluid Pressure (psi) | 120 |
| Maximum Solid Size (cm) | 9.65 |
| Maximum Solid Size (in) | 3.8 |
| Maximum Solid Size (mm) | 96.5 |
| Model | SaniForce |
| Overall Height (in) | 19.9 |
| Series | 4150 HS |
| Maximum Fluid Pressure (MPa) | 0.8 |
| Maximum Air Pressure (MPa) | 0.8 |
| Maximum Fluid Operating Temperature (°C) | 121 |
| Minimum Fluid Operating Temperature (°C) | -40 |
| Maximum Fluid Operating Temperature (°F) | 250 |
| Minimum Fluid Operating Temperature (°F) | -40 |
| Surface Finish | 32 Ra |
| compressor_required | Yes |
| Fluid Passage Size (in) | 4 |
| Fluid Passage Size (mm) | 100 |
| Tri-Clamp Connection Size | 4-inch |
| fluid_passage_size_cm | 10 |
| configuration_code | 4150HS.PS01ASSEFL-EOEP21 |
