Graco | SP3F.0076 SaniForce 3150, 3" HS SST Pneumatic Diaphragm Pump, SS Center, FL Checks, PO Diaphragms
Graco
Model: SP3F.0076
The Graco SaniForce 3150 is a 3-inch air-operated double diaphragm (AODD) pump designed for hygienic fluid transfer, capable of pumping at rates up to 130 gpm. Its quick knock-down design facilitates easy cleaning, and it offers a low cost of ownership.
This pump is suitable for food processing and personal care industries. Common uses include high-volume evacuation of liquid concentrates from storage containers and repackaging fluids from original containers into smaller ones. It can handle products such as flavorings, purees, sauces, and other low to medium viscosity materials.
- 3-inch sanitary pump with flow rates up to 130 gpm (492 lpm) and pressures up to 120 psi (8 bar).
- The seal-less diaphragm pump design prevents leaks and failures caused by running the pump dry.
- Graco double diaphragm pumps automatically stop under pressure, preventing failures from clogged lines or closed valves.
- Externally serviceable air valves provide high efficiency and minimize downtime.
- The PTFE/EPDM overmolded diaphragm design reduces areas where bacteria can accumulate, while improving wear resistance and diaphragm lifespan. It features no exposed diaphragm plate on the fluid side.
- Constructed with a 316L stainless steel wetted section.
- All fluid contact materials comply with FDA regulations and meet United States Code of Federal Regulations (CFR) Title 21.
- The flapper check valve allows passage of solids up to 2.46 inches (62.5 mm).
- Single-piece manifolds reduce the number of tri-clamps and gaskets, contributing to a cleaner fluid path and design.
Operational Specifications
| Specification | Value |
|---|---|
| UPC Product | 755652879466 |
| Division | PRO |
| Height | 0 IN | 0.000 CM |
| Length | 0 IN | 0.000 CM |
| Width | 0 IN | 0.000 CM |
| Volume | 0 FT3 | 0.000 M3 |
| Shipping Weight | 0 LBS | 0.000 KG |
Technical Specifications
| Specification | Value |
|---|---|
| Air Exhaust Port Size (in) | 3/4 |
| Air Exhaust Port Thread Gender | Female |
| Air Inlet Size (in) | 1/2 |
| Air Inlet Thread Gender | Female |
| For Use With | Food, Personal Care |
| Maximum Air Consumption (SCFM) | 220 |
| Maximum Air Pressure (bar) | 8 |
| Maximum Air Pressure (kPa) | 800 |
| Maximum Air Pressure (psi) | 120 |
| Maximum Cycle Rate (CPM) | 180 |
| Maximum Flow Rate (L/min) | 492 |
| Maximum Fluid Pressure (bar) | 8 |
| Maximum Fluid Pressure (kPa) | 800 |
| Maximum Fluid Pressure (psi) | 120 |
| Maximum Solid Size (cm) | 6.25 |
| Maximum Solid Size (in) | 2.46 |
| Maximum Solid Size (mm) | 62.5 |
| Model | SaniForce |
| Overall Height (in) | 19.9 |
| Series | 3150 HS |
| Maximum Fluid Pressure (MPa) | 0.8 |
| Maximum Air Pressure (MPa) | 0.8 |
| Maximum Fluid Operating Temperature (°C) | 82 |
| Minimum Fluid Operating Temperature (°C) | -40 |
| Maximum Fluid Operating Temperature (°F) | 180 |
| Minimum Fluid Operating Temperature (°F) | -40 |
| Surface Finish | 32 Ra |
| compressor_required | Yes |
| Fluid Passage Size (in) | 3 |
| Fluid Passage Size (mm) | 76 |
| fluid_passage_size_cm | 7.6 |
| configuration_code | 3150HS.PS01ASSGFL-POEP21 |
