Graco | SP3F.0072 SaniForce 3150, 3" HS SST Pneumatic Diaphragm Pump, SS Center, FL Checks, EO Diaphragms
Graco
Model: SP3F.0072
The Graco SaniForce 3150 is a 3-inch air-operated double diaphragm (AODD) pump designed for hygienic fluid transfer. It delivers flow rates up to 130 gpm and features a quick knock-down design for simplified cleaning and a low cost of ownership.
This pump is suitable for the food processing and personal care industries. Typical uses include high-volume transfer of liquid concentrates from storage tanks and repackaging fluids into smaller containers. It can handle products such as flavorings, purees, sauces, and other low to medium viscosity materials.
- 3-inch sanitary pump with flow rates up to 130 gpm (492 lpm) and pressures up to 120 psi (8 bar).
- Seal-less diaphragm design prevents leaks and failures caused by running the pump dry.
- Graco double diaphragm pumps stall under pressure, preventing failures due to blocked lines or closed valves.
- Externally serviceable air valves offer high efficiency and minimize downtime.
- EPDM overmolded diaphragm design reduces areas where bacteria can accumulate, enhancing wear and diaphragm lifespan without an exposed diaphragm plate on the fluid side.
- Constructed with 316L stainless steel wetted parts.
- All fluid contact materials comply with FDA regulations and United States Code of Federal Regulations (CFR) Title 21.
- Flapper check valve allows passage of solids up to 2.46 inches (62.5 mm).
- Single-piece manifolds reduce the need for tri-clamps and gaskets, resulting in a cleaner fluid path and design.
Operational Specifications
| Specification | Value |
|---|---|
| UPC Product | 755652879428 |
| Division | PRO |
| Height | 0 IN | 0.000 CM |
| Length | 0 IN | 0.000 CM |
| Width | 0 IN | 0.000 CM |
| Volume | 0 FT3 | 0.000 M3 |
| Shipping Weight | 0 LBS | 0.000 KG |
Technical Specifications
| Specification | Value |
|---|---|
| Air Exhaust Port Size (in) | 3/4 |
| Air Exhaust Port Thread Gender | Female |
| Air Inlet Size (in) | 1/2 |
| Air Inlet Thread Gender | Female |
| For Use With | Food, Personal Care |
| Maximum Air Consumption (SCFM) | 220 |
| Maximum Air Pressure (bar) | 8 |
| Maximum Air Pressure (kPa) | 800 |
| Maximum Air Pressure (psi) | 120 |
| Maximum Cycle Rate (CPM) | 180 |
| Maximum Flow Rate (L/min) | 492 |
| Maximum Fluid Pressure (bar) | 8 |
| Maximum Fluid Pressure (kPa) | 800 |
| Maximum Fluid Pressure (psi) | 120 |
| Maximum Solid Size (cm) | 6.25 |
| Maximum Solid Size (in) | 2.46 |
| Maximum Solid Size (mm) | 62.5 |
| Model | SaniForce |
| Overall Height (in) | 19.9 |
| Series | 3150 HS |
| Maximum Fluid Pressure (MPa) | 0.8 |
| Maximum Air Pressure (MPa) | 0.8 |
| Maximum Fluid Operating Temperature (°C) | 121 |
| Minimum Fluid Operating Temperature (°C) | -40 |
| Maximum Fluid Operating Temperature (°F) | 250 |
| Minimum Fluid Operating Temperature (°F) | -40 |
| Surface Finish | 32 Ra |
| compressor_required | Yes |
| Fluid Passage Size (in) | 3 |
| Fluid Passage Size (mm) | 76 |
| fluid_passage_size_cm | 7.6 |
| configuration_code | 3150HS.PS01ASSGFL-EOEP21 |
