Graco | SP3F.0052 SaniForce 3150, 3" HS SST Pneumatic Diaphragm Pump, SS Center, FL Checks, PO Diaphragms
Graco
Model: SP3F.0052
The Graco SaniForce 3150 is a 3-inch air-operated double diaphragm (AODD) pump designed for hygienic fluid transfer. It delivers flow rates up to 130 gpm and features a quick knock-down design for simplified cleaning and a low cost of ownership.
This pump is suitable for the food processing and personal care industries. Common applications include the high-volume evacuation of liquid concentrates from holding tanks and the repackaging of fluids from original containers into smaller ones. It can effectively pump materials such as flavorings, purees, sauces, and other low to medium viscosity liquids.
- 3-inch sanitary pump with flow rates up to 130 gpm (492 lpm) and pressures up to 120 psi (8 bar).
- Seal-less diaphragm design prevents leaks and failures caused by running the pump dry.
- Graco double diaphragm pumps stall under pressure, preventing failures from clogged lines or closed valves.
- Externally serviceable air valves provide efficient operation and minimize downtime.
- Features inlet and outlet tri-clamp connections for a quick knockdown design, facilitating easy cleaning and rapid maintenance.
- PTFE/EPDM overmolded diaphragm design minimizes areas where bacteria can accumulate, enhancing wear resistance and diaphragm lifespan. There is no exposed diaphragm plate on the fluid side.
- Constructed with a 316L stainless steel wetted section.
- All fluid contact materials are FDA-Compliant and adhere to the United States Code of Federal Regulations (CFR) Title 21.
- Flapper check valve allows for the passage of solids up to 2.46 inches (62.5 mm).
- Single-piece manifolds reduce the number of tri-clamps and gaskets, contributing to a cleaner fluid path and design.
Operational Specifications
| Specification | Value |
|---|---|
| UPC Product | 755652879183 |
| Division | PRO |
| Height | 0 IN | 0.000 CM |
| Length | 0 IN | 0.000 CM |
| Width | 0 IN | 0.000 CM |
| Volume | 0 FT3 | 0.000 M3 |
| Shipping Weight | 0 LBS | 0.000 KG |
Technical Specifications
| Specification | Value |
|---|---|
| Air Exhaust Port Size (in) | 3/4 |
| Air Exhaust Port Thread Gender | Female |
| Air Inlet Size (in) | 1/2 |
| Air Inlet Thread Gender | Female |
| For Use With | Food, Personal Care |
| Maximum Air Consumption (SCFM) | 220 |
| Maximum Air Pressure (bar) | 8 |
| Maximum Air Pressure (kPa) | 800 |
| Maximum Air Pressure (psi) | 120 |
| Maximum Cycle Rate (CPM) | 180 |
| Maximum Flow Rate (L/min) | 492 |
| Maximum Fluid Pressure (bar) | 8 |
| Maximum Fluid Pressure (kPa) | 800 |
| Maximum Fluid Pressure (psi) | 120 |
| Maximum Solid Size (cm) | 6.25 |
| Maximum Solid Size (in) | 2.46 |
| Maximum Solid Size (mm) | 62.5 |
| Model | SaniForce |
| Overall Height (in) | 19.9 |
| Series | 3150 HS |
| Maximum Fluid Pressure (MPa) | 0.8 |
| Maximum Air Pressure (MPa) | 0.8 |
| Maximum Fluid Operating Temperature (°C) | 82 |
| Minimum Fluid Operating Temperature (°C) | -40 |
| Maximum Fluid Operating Temperature (°F) | 180 |
| Minimum Fluid Operating Temperature (°F) | -40 |
| Surface Finish | 32 Ra |
| compressor_required | Yes |
| Fluid Passage Size (in) | 3 |
| Fluid Passage Size (mm) | 76 |
| Tri-Clamp Connection Size | 3-inch |
| fluid_passage_size_cm | 7.6 |
| configuration_code | 3150HS.PS01ASSEFL-POEP21 |
