Graco | 226940 1:1 Ratio Fast-Flo Air Operated Piston Transfer Carbon Steel/Stainless Steel Drum Pump with T&L Packing
Graco
Model: 226940
Fast Flo 1:1 pumps operate at air input pressures up to 180 psi (12 bar, 1.2 MPa) to provide a consistent, dependable flow. Models are available in drum length and stubby configurations for drum transfer or wall mount siphon feed. These pumps are suitable for lower viscosity fluids and offer plate (flat) check options.
Maximum delivery is up to 5 gpm (19 lpm) with a maximum fluid working pressure of 180 psi (12 bar). They are designed for lower viscosity fluids.
- Air-powered operation for high reliability and cost efficiency
- Delivery rate up to 5 gpm (19 lpm)
- Offered in stainless steel or carbon steel
- UL options available when installed according to NFPA standards
Operational Specifications
| Specification | Value |
|---|---|
| UPC Product | 633955608443 |
| Division | PRO |
| Height | 3.6 IN | 9.144 CM |
| Length | 55.2 IN | 140.208 CM |
| Width | 3.6 IN | 9.144 CM |
| Volume | .414 FT3 | 0.012 M3 |
| Shipping Weight | 18 LBS | 8.165 KG |
Technical Specifications
| Specification | Value |
|---|---|
| Air Inlet Size (in) | 1/4 |
| Air Inlet Size (mm) | 6.35 |
| Air Inlet Thread Gender | Female |
| Fluid Outlet Size (mm) | 19.05 |
| Fluid Outlet Thread Gender | Female |
| Maximum Air Inlet Pressure (bar) | 12.41 |
| Maximum Air Inlet Pressure (kPa) | 1241 |
| Maximum Air Inlet Pressure (psi) | 180 |
| Maximum Continuous Cycle Rate (CPM) | 100 |
| Maximum Flow Rate (L/min) | 15.1 |
| Maximum Intermittent Cycle Rate (CPM) | 4 |
| Maximum Working Pressure (bar) | 12.4 |
| Maximum Working Pressure (kPa) | 1240 |
| Maximum Working Pressure (psi) | 180 |
| Minimum Flow Rate (GPM) | 180 |
| Model | Fast-Flo |
| Portable | Non-Portable |
| Maximum Working Pressure (MPa) | 1.2 |
| Compatible Drum Height (in) | 34.6 |
