Graco | LP725 Low Pressure RAC X LP SwitchTip, 725
Graco
Model: LP725
The Reverse-A-Clean (RAC) 725 Low Pressure (LP) RAC X SwitchTip allows spraying at up to 50% lower pressure. This tip provides a 14 to 16 inch fan pattern and a 0.025 inch orifice. The tip can be reversed to clear clogs.
This tip is designed for large surface areas including walls, ceilings, and floors.
-
Reduced Prep & Cleanup Time
- Minimizes mess due to less overspray.
- Ensures paint is applied precisely where intended.
-
Simplified Pattern Overlap
- Produces a softer spray fan pattern.
- Facilitates easy application of any material to any surface.
- Delivers a consistently blended finish.
-
Extended Tip Lifespan
- Spraying at half pressure doubles the tip's operational life.
- Reduces sprayer maintenance requirements, extending life up to 2X.
-
SmartTip Technology
- Features exclusive internal tip geometry.
- Lowers the energy required to atomize paints, stains, and other materials.
- Achieves a superior finish with reduced pressure.
- Compatible with SmartControl on select Graco sprayers.
-
Market-Leading Tip Performance
- Compatible with all airless sprayers.
- Offers the longest-lasting fan pattern.
- Provides the highest quality finish with a consistent spray pattern.
-
Clear Tip Size Identification
- Large, raised tip size numbers remain legible even when covered in paint.
-
Advanced Tip Design
- A locking tab secures the tip in the guard.
- Allows the tip to be snapped into either the spray or reverse position.
- The OneSeal tip gasket installs without tools.
- A solvent seal is available for use with extremely hot solvents.
Operational Specifications
| Specification | Value |
|---|---|
| UPC Product | 755652695110 |
| Division | CED |
| Height | 1 IN | 2.540 CM |
| Length | 5.3 IN | 13.462 CM |
| Width | 2.7 IN | 6.858 CM |
| Volume | .008 FT3 | 0.000 M3 |
| Shipping Weight | .09 LBS | 0.041 KG |
Technical Specifications
| Specification | Value |
|---|---|
| Orifice Diameter (in) | 0.025 |
| Maximum Working Pressure (kPa) | 28000 |
| Maximum Working Pressure (psi) | 4050 |
| Maximum Working Pressure (bar) | 280 |
| For Use With | RAC X HandTite Tip Guard |
| Maximum Fan Width (in) | 14 |
| Maximum Fan Width (mm) | 406 |
| Maximum Fan Width (cm) | 35 |
| Maximum Flow Rate (L/min) | 2.54 |
| Minimum Fan Width (in) | 14 |
| Minimum Fan Width (mm) | 356 |
| Model | RAC X |
| Series | LP SwitchTip |