Menu
Cart 0
Graco | FFLP110 Fine Finish Low Pressure RAC X FF LP SwitchTip, 110

Graco | FFLP110 Fine Finish Low Pressure RAC X FF LP SwitchTip, 110

  • $82.00


Graco

Model: FFLP110

The Reverse-A-Clean (RAC) 110 Fine Finish Low Pressure (FF LP) RAC X SwitchTip sprays at up to 50% lower pressure. This tip produces a 2 to 4 inch fan pattern with a 0.010 inch orifice, suitable for finishing materials. The tip can be reversed to clear clogs easily.

Designed for fine finish applications.

  • Reduced Prep & Cleanup Time
    • Minimizes mess due to less overspray.
    • Ensures paint is applied accurately.
  • Simplified Pattern Overlap
    • Features a softer spray fan pattern.
    • Facilitates easy application of any material to any surface.
    • Delivers a consistent, blended finish.
  • Extended Tip Lifespan
    • Spraying at half pressure doubles the tip's lifespan.
    • Reduces sprayer maintenance, extending life up to 2X.
  • SmartTip Technology
    • Incorporates exclusive internal tip geometry.
    • Decreases the energy needed to atomize paints, stains, and other materials.
    • Achieves a superior finish with reduced pressure.
    • Compatible with SmartControl on select Graco sprayers.
  • Market-Leading Tip Performance
    • Works with all airless sprayers.
    • Provides the longest-lasting fan pattern.
    • Achieves the highest quality finish with a consistent spray pattern.
  • Clear Tip Size Identification
    • Large, raised tip size numbers remain legible even when covered in paint.
  • Superior Tip Design Features
    • A locking tab secures the tip in the guard.
    • Allows the tip to be snapped into either the spray or reverse position.
    • The OneSeal tip gasket installs without tools.
    • A solvent seal is available for use with extremely hot solvents.

Operational Specifications

Specification Value
UPC Product 755652394525
Division CED
Height 1 IN | 2.540 CM
Length 5.3 IN | 13.462 CM
Width 2.7 IN | 6.858 CM
Volume .008 FT3 | 0.000 M3
Shipping Weight .09 LBS | 0.041 KG

Technical Specifications

Specification Value
Orifice Diameter (in) 0.010
Maximum Working Pressure (kPa) 28000
Maximum Working Pressure (psi) 4050
Maximum Working Pressure (bar) 280
For Use With RAC X HandTite Tip Guard
Maximum Fan Width (in) 2
Maximum Fan Width (mm) 102
Tip Type Airless
Pattern Size (in) 2 to 4
Maximum Fan Width (cm) 5
Maximum Flow Rate (L/min) 0.42
Minimum Fan Width (in) 2
Minimum Fan Width (mm) 51
Pattern Size (mm) 50.8 to 101.6
Model RAC X
Series FF LP SwitchTip

We Also Recommend