Husqvarna DM 220 | DRILL MOTOR DM 220 100-120 V | 1-ph | 60 Hz | US | 1 1/4" | 966563503
Part Number: 966 56 35-03 (966563503)
The Husqvarna DM 220 is a versatile electric core drill motor designed for both wet and dry drilling applications. Engineered for precision and efficiency, this unit features an integrated level guiding system with LED indicators to ensure accurate hole placement. The ergonomic D-handle design provides enhanced control during operation.
Technical Specifications:
- Power source: 100-120 V, 1-phase, 60 Hz
- Handheld drilling capacity: Up to 4 in.
- Stand-mounted drilling capacity: Up to 6 in.
- Spindle connection: 1 1/4"
- Article number: 966563503 / 966 56 35-03
This drill is suitable for light-duty tasks, including the installation of ventilation ducts, plumbing pipes, and electrical sockets. It is designed to accommodate both professional contractors and operators requiring a user-friendly, reliable tool.
Product Features
360° adjustable front handle
For best ergonomic position
Guidance for exact drilling
An electronic positioning system shows when the machine is in a vertical, horizontal or preferred angled position.
Overload protection
The machine uses pulsation to warn you of an approaching overload. If the load is not reduced the motor will shut off, to prevent overheating. Elgard™ increases productivity and extends product life.
Durable and ergonomic design
Durable and shock-proof, designed to protect the electronics. Easy to carry and install thanks to low weight and ergonomic design.
Dry and wet drilling
Easy to switch between dry and wet drilling
Smooth start with normal fuses
Softstart™ lowers incoming current to reduce amperage when starting the motor.
Elgard™
The machine uses pulsation to warn you of an approaching overload. This increases productivity and extends product life.
Electronic positioning system
Shows when the machine is in a vertical, horizontal or preferred angled position. This provides efficient drilling.
Smart Start®
Used with starting a hole, speed is reduced by half using the Smart Start® button, which reduces vibration.
Softstart™
An electronic current limiter for soft starts with normal fuses. This gives you a smooth start with high productivity and reduces initial load on motor.
Angle drilling
Drilling holes in stepless adjustable angles.
Horizontal drilling
Drilling horizontally.
Vertical drilling
Drilling upwards and downwards.
Channels, pipes and cables
Drilling ventilation channels and holes for pipes and cables.
| Motor | |
|---|---|
| Rated input power | 2.5 hp |
| Frequency | 60 Hz |
| Voltage | 100-120 V |
| Phases | 1 ph |
| Power Source | Corded |
| Equipment | |
| Drill bit diameter handheld, max | 4 in |
| Drill bit diameter with stand, max | 6 in |
| Recommended drill bit diameter, min | 1 in |
| Coolant | Wet /dry |
| Transmission | |
| Number of gearbox speeds | 3 |
| Spindle speed unloaded gear 1 | 730 rpm |
| Spindle speed unloaded gear 2 | 1,700 rpm |
| Spindle speed unloaded gear 3 | 3,600 rpm |
| Product data | |
| Water connector | G 1 / 4" |
| Water pressure, max | 116 psi |
| Spindle thread, inner | 5/8" 11 UNC |
| Spindle thread, outer | 1 1/4" 7 UNC |
| Dimensions | |
| Product size length | 22.4 in |
| Product size width | 4.2 in |
| Product size height | 15 in |
| Weight | 16.5 lbs |
| Packaging length (Calc) | 25.984 in |
| Packaging width (Calc) | 20.472 in |
| Packaging height (Calc) | 5.906 in |
| Article gross weight (Calc) | 31.306 lbs |
| Sound and noise | |
| Sound power level, guaranteed (LWA) | 108 dB(A) |
| Sound power level, measured | 107 dB(A) |
| Sound pressure level at operators ear (LpA) | 93 dB(A) |
- 505443305 — CABLE PRCD 10mV DM 220
- 510181306 — CABLE ASSY 110 V US DM 220
- 521907204 — CABLE Assy 230V AU DM 220
- 521907405 — CABLE Assy 230V CH DM220
- 521919004 — CABLE Assy 110V UK DM220
- 599353201 — CABLE Assy 230V SA DM220
- 575811001 — CABLE SLEEVE BENDING PROTECTION
- 503215330 — SCREW ITXSCM Internal Torx Socket Head Cap M 5 X 30 12.9
- 589991601 — SEAL SEAL GEARBOX DM220
- 720130951 — PARALLEL PIN ISO 8734 TYPE A 5x18 TH St
- 503255301 — NEEDLE BEARING RULLBUSSN
- 503254201 — NEEDLE BEARING BUSSNING
- 525401402 — GEARSHIFT LEVER ASSY DM220/230
- 525481001 — OIL PLUG 1/4"
- 502496505 — O-RING 19x3.15 NBR
- 525297302 — FRONT HANDLE ASSY DM220
- 536808301 — LID HANDLE LID AKULON K224 - PG2
- 725250551 — SCREW EHHM ISO 4014 M 10 X 70 8.8 ZPB
- 574169401 — HANDLE GRIPHANDLE
- 574169501 — BUSHING RUBBER
- 574169701 — DISTANCE
- 525443803 — PLATE ATTACHMENT ASSY DM220
- 575636301 — SCREW IHSCM M8x12H 8.8 FZB LOWHEAD
- 590142601 — ATTACHMENT PLATE DM 220
- 525540701 — WEDGE MOTOR BRACKET DMS240/DM220/DS250
- 725536851 — SCREW IHSCM ISO 4762 M 6 X 16 12.9 ZPB
- 725536401 — SCREW IHSCM M6x10 8.8 ZPB
- 575808301 — O-RING 54.6 x 2.4 NBR
- 587823101 — RING Lock Ring DM220
- 525296901 — BRACKET FRONT HANDLE DM220
- 525297101 — RING FRONT HANDLE DM220
- 525297001 — HOUSING WATER DUST FINISHED PART DM 220
- 574169801 — WASHER PRESSURE WASHER
- 574170001 — COVER FRICTION ELEMENT
- 576269701 — GEAR HOUSING ASSY INSERT
- 590806002 — GEAR HOUSING ASSY INCL BEARING AND INSERT DM220
- 575557901 — RADIAL SEAL 25x35x7 NBR BAU2SLX2
- 544124801 — GEAR WHEEL 36-TEETH, CORE DRILL MOTOR DM 225
- 735312040 — RETAINER RING SHAFT TYPE SW 18 St PP
- 544124601 — GEAR WHEEL 29-TEETH, CORE DRILL MOTOR DM 225
- 544124401 — GEAR WHEEL 21-TEETH, CORE DRILL MOTOR DM 225
- 735311600 — CIRCLIP SGA 14x1 St PP
- 587366903 — COUPLING SPARE PART DM220/230
- 738229927 — BALL BEARING SINGLE ROW - 02 629-2Z-C3
- 577244203 — COLLECTOR WATER AND DUST DM220
- 577244201 — COLLECTOR WATER AND DUST
- 577243803 — SHAFT KIT 1/2
- 577243804 — SHAFT KIT 5/8
- 544381601 — KEY SPINDLE SHAFT CORE DRILL MOTOR, DM225
- 582697301 — PARALLEL KEY 5x5x36
- 738210514 — BALL BEARING SINGLE ROW - 10 6005-2RS1-C3
- 735312600 — CIRCLIP SGA 25x1.2 St PP
- 587362503 — CLUTCH ASSY DM220/230
- 504571103 — GEAR WHEEL ASSY 34-TEETH CORE DRILL MOTOR DM230 Mark II
- 504094602 — ADAPTER CORE DRILL MOTOR
- 581094101 — STRAINER G 1/2", SPINDLE
- 581094102 — STRAINER 5/8" UNC, SPINDLE
- 544130003 — INSERT GEAR SHIFTER
- 587698901 — O-RING NBR Shore 72 43x2,5
- 544122901 — AIR CONDUCTOR CORE DRILL MOTOR DM 225
- 586919101 — AIR CONDUCTOR DM230 ll
- 503263003 — O-RING 31.6X2.4
- 544123001 — BEARING SUPPORT CORE DRILL MOTOR DM230
- 505576504 — ROTOR ASSY BEARING SPARE PART DM220/230 120V
- 505576604 — ROTOR ASSY BEARING SPARE PART DM220/230 230V
- 503252401 — BALL BEARING 6001DDUC3
- 735312810 — CIRCLIP SGH 28x1.2 St PP
- 501008401 — SPRING WASHER VB7448, CORE DRILL MOTOR DM 230
- 582590401 — RADIAL SEAL 12x22x6 BAB1SL05
- 588613201 — COVER MIDDLE KIT INCL AIR CONDUCTOR
- 589996101 — COVER MIDDLE DM 220
- 501130104 — PRINTED CIRCUIT BOARD ELECTRONIC BOX 230V
- 501130103 — PRINTED CIRCUIT BOARD ELECTRONIC BOX 120V
- 525538701 — DIODE DIOD DM220
- 525834401 — LID CIRCUIT BOARD DM220
- 575789501 — PIPE LIGHT LED PROTECTION
- 581774905 — ELECTRONIC BOX DM220 ASSY Plastic Holder new material PA6+30%GF
- 581774906 — ELECTRONIC BOX DM220 ASSY Plastic Holder new material PA6+30%GF
- 729570901 — SCREW CCRPANT TYPE F ST3.5x6.5 St ZPB
- 724129101 — SCREW CRPANM ISO 7045 M 4 X 12 5.8 ZPB
- 735113650 — SPRING WASHER DIN 137 TYPE A 4.3x8x0.5 St
- 504545001 — FILTER EMC. ASSY 230V DM330 DM340 DM220
- 588467403 — TERMINAL BLOCK 30A 5-pole
- 582873903 — BRUSH HOLDER KIT 12.6mm DM220/230
- 506225805 — CARBON BRUSH 12,5 DM220/230 TSX0
- 725532955 — SCREW IHSCM ISO 4762 M 5 X 16 12.9
- 503202182 — SCREW IHSCM M5x82 A2-80 SS
- 577095101 — SPACER MOTOR HOUSING
- 576967401 — PLATE PLASTIC PROTECTION
- 576242501 — CABLE PE
- 525295202 — MOTOR HOUSING 45% GF
- 575347905 — LABEL MARK DM220 Europe
- 575347906 — LABEL MARK DM220 US
- 575347402 — LABEL VARNING LEFT DM 220
- 575347702 — LABEL VARNING RIGHT DM 220
- 575347301 — LABEL GEARS
- 589325003 — STATOR ASSY SPARE PART DM220 230V
- 589325004 — STATOR ASSY SPARE PART DM220 120V
- 503230402 — WASHER LOCK 5.4x9x1.8 Zn FLAKE (DELTA PROTECT)
- 504909410 — SCREW ITXSCT Internal Torx Socket Head Cap MT5x10 T27 10.9 Zn/Fe
- 525444001 — COVER ASSY LID DM 230 D
- 504909425 — SCREW ITXSCT Internal Torx Socket Head Cap MT5x25 T27 10.9 Zn/Fe
- 525542102 — TRIGGER No trigger lock DM 220
- 576845402 — CABLE Trigger to terminalblock
- 504546301 — CAPACITOR Drill motor DM330
- 544123201 — CABLE CLAMP CORE DRILL MOTOR DM 225
- 525476301 — SCREW ITXPANT PT 5x16 10.9 ZPB
- 525443001 — COVER PLATE ASSY DM220
- 577244603 — HANDLE KIT REAR SPARE PART
- 536334901 — BRACKET Trigger Lock assy
- 502294503 — CARRYING CASE DM220/DM230
- 576276602 — LABEL CARRYING CASE DM220
- 531140952 — KEY DM | 32 mm
- 531140951 — KEY DM | 24 mm
- 575872201 — VACUUM SYSTEM DUST COLECTOR
- 546121701 — HOLDER ASSY Support Pin
- 542139768 — SCREW
- 576024901 — HANDLE SCREW HANDLE
- 501072201 — HOSE ASSY WATER CONNECTION DM
- 501558001 — NUT KIT W O-RING
- 576129701 — HOSE CLAMP Oetiker stepless 15.3-706R
- 581893601 — HOSE PVC 8x13 GREY reinforced, softener DOTP L=230mm
- 587437802 — VALVE ASSY DM
- 502496504 — O-RING 25x3 NBR
- 505103501 — O-RING 10.5X2.7 EPDM
- 589780701 — STRAINER wet cutting kit
- 503266003 — COUPLER TYPE GARDENA 3/4" GHT W STOP ORIGINAL
- 503266004 — COUPLER HOSE CONNECTOR GARDENA 1/2" HOSE WITH STOP
- 586466501 — KIT BOX CATCHES
- 582086301 — NIPPLE 1/4" MALE THREAD
- 522935001 — START DEVICE DM 220 | Telescopic
- 504098701 — BRACKET ASSY DM230
- 593563001 — SLURRY RINGS WSR100 mm
- 593563002 — SLURRY RINGS WSR150 mm
- 593563003 — SLURRY RINGS WSR200 mm
- 593563004 — SLURRY RINGS WSR250 mm
- 593563005 — SLURRY RINGS WSR300 mm
- 593563006 — SLURRY RINGS WSR350 mm
- 593563401 — SEALING DISCS DS100 mm
- 593563402 — SEALING DISCS DS150 mm
- 593563403 — SEALING DISCS DS200 mm
- 593563404 — SEALING DISCS DS250 mm
- 593563405 — SEALING DISCS DS300 mm
- 593563406 — SEALING DISCS DS350 mm
- 593963901 — RUBBER SEAL SET D100 for WSR100
- 593963902 — RUBBER SEAL SET D150 FOR WSR150
- 593963903 — RUBBER SEAL SET D200 FOR WSR200
- 593963904 — RUBBER SEAL SET D250 FOR WSR250
- 593963905 — RUBBER SEAL SET D300 FOR WSR300
- 593963906 — RUBBER SEAL SET D350 FOR WSR350
- 531280329 — SLURRY COLLECTOR U-shaped | 212 mm
- 531280000 — SLURRY COLLECTOR 65 mm
- 531280001 — SLURRY COLLECTOR 110 mm
- 531280295 — SLURRY COLLECTOR 130 mm
- 531280002 — SLURRY COLLECTOR 160 mm
- 531280296 — SLURRY COLLECTOR 180 mm
- 531280003 — SLURRY COLLECTOR 210 mm
- 531074682 — SLURRY COLLECTOR 220 mm
- 531280004 — SLURRY COLLECTOR 260 mm
- 531280005 — SLURRY COLLECTOR 310 mm
- 531280006 — SLURRY COLLECTOR 360 mm
- 531280322 — SLURRY COLLECTOR 410 mm
- 531074678 — SLURRY COLLECTOR 430 mm | Water
- 531074622 — SLURRY COLLECTOR V-shaped | 350 mm
- 531280007 — SLURRY COLLECTOR V-shaped | 700 mm
- 531077100 — COLLECTOR
- 531280008 — RUBBER GAITERS
- 531074688 — Drill snap, 1/2" F
- 531074674 — TOOL Drill snap, 1 1/4"
- 531072003 — Drill snap, CR1 28
- 531119518 — KEY DM | 27 mm
- 531119033 — KEY KEY DM | 41 mm
- 544970005 — KEY | 24/30 mm
593563001
Slurry rings WSR
531074622
Slurry collector V-shaped
967702104
W 250 P
967664001
S 13
966827304
DS 250
599582304
WT 15i
536089802
WT 10 MP
506326302 Discontinued
Pressurized water tank
598742401
WT2GO
531074674
Drill snap
502294502
Carrying case
543052878
Washer quick release
504044701 Discontinued
Front handle
531140951
Drill motor keys
531140952
Drill motor keys
966766805
DC 1400
