Graco | SP2B.0078 SaniForce 2150, 2" 3A SST Pneumatic Diaphragm Pump, SS Center, SS Seats, PT Balls, EO Diaphragms
Graco
Model: SP2B.0078
The Graco SaniForce 2150 is a 2-inch air-operated double diaphragm (AODD) pump designed for hygienic fluid transfer. It delivers flow rates up to 180 gpm and features a quick knock-down design for simplified cleaning and a low cost of ownership.
This pump is suitable for the food processing and personal care industries. Common uses include efficiently evacuating liquids from holding tanks and repackaging fluids into smaller containers. It can handle products such as flavorings, purees, sauces, and other low to medium viscosity materials.
- 2-inch sanitary pump with flow rates up to 180 gpm (681 lpm) and pressures up to 120 psi (8 bar).
- Seal-less diaphragm design prevents leaks and failures caused by running the pump dry.
- Graco double diaphragm pumps stall at pressure, preventing failures from clogged lines or closed valves.
- Externally serviceable air valves ensure high efficiency and minimize downtime.
- Features inlet and outlet tri-clamp connections for a quick knockdown design, facilitating easy cleaning and rapid maintenance.
- EPDM overmolded diaphragm design reduces areas where bacteria can accumulate, enhancing wear and diaphragm lifespan without an exposed diaphragm plate on the fluid side.
- Includes a leak sensor to alert users of potential process compromises.
- Constructed with a 316L stainless steel wetted section.
- All fluid contact materials comply with FDA regulations and United States Code of Federal Regulations (CFR) Title 21.
- Capable of passing solids up to 0.5 inches (12.7 mm).
Operational Specifications
| Specification | Value |
|---|---|
| UPC Product | 755652881063 |
| Division | PRO |
| Height | 49.5 IN | 125.730 CM |
| Length | 28.25 IN | 71.755 CM |
| Width | 33.5 IN | 85.090 CM |
| Volume | 27.11 FT3 | 0.768 M3 |
| Shipping Weight | 157 LBS | 71.214 KG |
Technical Specifications
| Specification | Value |
|---|---|
| Air Exhaust Port Size (in) | 3/4 |
| Air Exhaust Port Thread Gender | Female |
| Air Inlet Size (in) | 1/2 |
| Air Inlet Thread Gender | Female |
| For Use With | Food, Personal Care |
| Maximum Air Consumption (SCFM) | 200 |
| Maximum Air Pressure (bar) | 8 |
| Maximum Air Pressure (kPa) | 800 |
| Maximum Air Pressure (psi) | 120 |
| Maximum Cycle Rate (CPM) | 135 |
| Maximum Flow Rate (L/min) | 681 |
| Maximum Fluid Pressure (bar) | 8 |
| Maximum Fluid Pressure (kPa) | 800 |
| Maximum Fluid Pressure (psi) | 120 |
| Maximum Solid Size (cm) | 1.27 |
| Maximum Solid Size (in) | 0.5 |
| Maximum Solid Size (mm) | 12.7 |
| Model | SaniForce |
| Overall Height (in) | 35.7 |
| Series | 2150 3A |
| Maximum Fluid Pressure (MPa) | 0.8 |
| Maximum Air Pressure (MPa) | 0.8 |
| Maximum Fluid Operating Temperature (°C) | 104 |
| Minimum Fluid Operating Temperature (°C) | -40 |
| Maximum Fluid Operating Temperature (°F) | 220 |
| Minimum Fluid Operating Temperature (°F) | -40 |
| Surface Finish | 32 Ra |
| compressor_required | Yes |
| Fluid Passage Size (in) | 2 |
| Fluid Passage Size (mm) | 50 |
| Tri-Clamp Connection Size | 2-inch |
| fluid_passage_size_cm | 5 |
| configuration_code | 21503A.PS02ASSASSPTEOEP21 |
